Cgs synth

--- In cgs_synth@yahoogroups.com, "Andrew" <dumpstatic@...> wrote:
>
> Anyone have a spare "Master Divider" (CGS22) PCB they don't want? Due
> to lack of interest, they aren't available anymore. Being the oddball
> that I am, I want one :)
>
> thanks,
> Drew
>

>At 03:09 PM 5/2/2007, x24holsey wrote:
>
>>I was thinking of a building a couple of these myself. If Ken needed
>>an order for the
>>minimum of 3 (as he has for blue special order boards) I'd grab two
>>of them if you'll take
>>the third. Seems really handy to have the phase offset for the
>>divide down timing clock
>>signals.
>
>I'd buy one, also.
>--
>john
>

From: sasami@...
To: cgs_synth@yahoogroups.com
Sent: Wednesday, May 02, 2007 7:19 PM
Subject: Re: [cgs_synth] Re: WTB: Master Divider PCB



>Did the "aren't available anymore" come from Ken?

"Aren't available at the moment pending a decision." is closer to the mark.
I've only ever sold about 20, so that's a lot of money to tie up in stock
that doesn't move, so I have yet to decide whether to kill it or give it
another go. One thing I was thinking of doing was shortening the number of
stages, and providing all with the four phases out. For longer division
sequences, it would be a simple matter to use two in series.

This of course means I need to make time to do so. It won't be for this run
of PCBs whatever the case, as it is already full of higher priority boards.

Ken

__________________________________________________________
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>





[Non-text portions of this message have been removed]

On May 2, 2007, at 8:00 PM, The Alison Project wrote:

> I will pipe up here, the Master Divider was one of the last things I
> built from Ken (and yes I bought the pcb), I was a little intimidated
> by the module at first which is why I held off ordering it for some
> time, just confused about the whole module (those damn rotaries and
> different phases, I was a newbie haha excuses).
>
> Now I will never part with it, it should be in anyone's home who
> loves the Burst Gen, Pulse Divider, Gate Comp, Seq Switch etc...
>
> Throw in a clock and get multiple pulse divisions out in different
> phases.. I love this module.
>
> Chris
>
> -
> The Alison Project
> www.thealisonproject.com
>
> ----- Original Message -----
> From: sasami@...
> To: cgs_synth@yahoogroups.com
> Sent: Wednesday, May 02, 2007 7:19 PM
> Subject: Re: [cgs_synth] Re: WTB: Master Divider PCB
>
> >Did the "aren't available anymore" come from Ken?
>
> "Aren't available at the moment pending a decision." is closer to the
> mark.
> I've only ever sold about 20, so that's a lot of money to tie up in
> stock
> that doesn't move, so I have yet to decide whether to kill it or give
> it
> another go. One thing I was thinking of doing was shortening the
> number of
> stages, and providing all with the four phases out. For longer
> division
> sequences, it would be a simple matter to use two in series.
>
> This of course means I need to make time to do so. It won't be for
> this run
> of PCBs whatever the case, as it is already full of higher priority
> boards.
>
> Ken
>
> __________________________________________________________
> Ken Stone sasami@...
> Modular Synth PCBs for sale <http://www.cgs.synth.net/>
> Australian Miniature Horses & Ponies
> <http://www.blaze.net.au/~sasami/>
>
> [Non-text portions of this message have been removed]
>
>
>

[Non-text portions of this message have been removed]

--- In cgs_synth@yahoogroups.com, Scott Deyo <contact@...> wrote:
>
> And with VC Switching, you can switch between filter responses,
delays,
> LFOs, add X to every other note, whatever. In a redesign with four
> phases.... add glide and get some crossfade action going!
>
> Scott Deyo
> The Bridechamber
> contact@...
> www.bridechamber.com
>
>
> On May 2, 2007, at 8:00 PM, The Alison Project wrote:
>
> > I will pipe up here, the Master Divider was one of the last
things I
> > built from Ken (and yes I bought the pcb), I was a little
intimidated
> > by the module at first which is why I held off ordering it for
some
> > time, just confused about the whole module (those damn rotaries
and
> > different phases, I was a newbie haha excuses).
> >
> > Now I will never part with it, it should be in anyone's home who
> > loves the Burst Gen, Pulse Divider, Gate Comp, Seq Switch etc...
> >
> > Throw in a clock and get multiple pulse divisions out in
different
> > phases.. I love this module.
> >
> > Chris
> >
> > -
> > The Alison Project
> > www.thealisonproject.com
> >
> > ----- Original Message -----
> > From: sasami@...
> > To: cgs_synth@yahoogroups.com
> > Sent: Wednesday, May 02, 2007 7:19 PM
> > Subject: Re: [cgs_synth] Re: WTB: Master Divider PCB
> >
> > >Did the "aren't available anymore" come from Ken?
> >
> > "Aren't available at the moment pending a decision." is closer
to the
> > mark.
> > I've only ever sold about 20, so that's a lot of money to tie up
in
> > stock
> > that doesn't move, so I have yet to decide whether to kill it or
give
> > it
> > another go. One thing I was thinking of doing was shortening the
> > number of
> > stages, and providing all with the four phases out. For longer
> > division
> > sequences, it would be a simple matter to use two in series.
> >
> > This of course means I need to make time to do so. It won't be
for
> > this run
> > of PCBs whatever the case, as it is already full of higher
priority
> > boards.
> >
> > Ken
> >
> > __________________________________________________________
> > Ken Stone sasami@...
> > Modular Synth PCBs for sale <http://www.cgs.synth.net/>
> > Australian Miniature Horses & Ponies
> > <http://www.blaze.net.au/~sasami/>
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
>
> [Non-text portions of this message have been removed]
>

On 5/3/07, Paul Schmidt <paul_schmidt@...> wrote:
>
> > I have one I bought from Scott at Bridechamber. I
> > have some videos of the CGS Master divider in action
> > on youtube
> >
> > Paul
> >
> >
>
>

--
http://www.myspace.com/23isgood


[Non-text portions of this message have been removed]

--- In cgs_synth@yahoogroups.com, sasami@... wrote:

> One thing I was thinking of doing was shortening the number of
> stages, and providing all with the four phases out. For longer division
> sequences, it would be a simple matter to use two in series.
>
> This of course means I need to make time to do so. It won't be for
this run
> of PCBs whatever the case, as it is already full of higher priority
boards.
>
> Ken

>This would be an incredible module! Have you given this redesign any
>more thought?
>
>Cheers,
>Kevin
>
>
>--- In cgs_synth@yahoogroups.com, sasami@... wrote:
>
>> One thing I was thinking of doing was shortening the number of
>> stages, and providing all with the four phases out. For longer division
>> sequences, it would be a simple matter to use two in series.
>>
>> This of course means I need to make time to do so. It won't be for
>this run
>> of PCBs whatever the case, as it is already full of higher priority
>boards.
>>
>> Ken
>
>
>
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>
>Yahoo! Groups Links
>
>
>
>

From: sasami@...
To: cgs_synth@yahoogroups.com
Sent: Sunday, November 11, 2007 3:53 PM
Subject: Re: [cgs_synth] Re: WTB: Master Divider PCB


It has been redesigned, and the first ones will be run as soon as I finish a
few updates to other boards I need to get made. Within the month is the target.

Ken

>This would be an incredible module! Have you given this redesign any
>more thought?
>
>Cheers,
>Kevin
>
>
>--- In cgs_synth@yahoogroups.com, sasami@... wrote:
>
>> One thing I was thinking of doing was shortening the number of
>> stages, and providing all with the four phases out. For longer division
>> sequences, it would be a simple matter to use two in series.
>>
>> This of course means I need to make time to do so. It won't be for
>this run
>> of PCBs whatever the case, as it is already full of higher priority
>boards.
>>
>> Ken
>
>
>
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>
>Yahoo! Groups Links
>
>
>
>
__________________________________________________________
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>





[Non-text portions of this message have been removed]

On Nov 11, 2007, at 4:48 PM, sasami@... wrote:

> >For those of us who have the Master Divider are the changes to this
> new
> version going to make us want it as well (not that I don't buy
> basically all
> yoru projects anyways)...
>
> Beats me!
> The two rotary switches are gone. Instead all phases are present on
> all
> outputs. However ... there aren't as many stages, so you may want to
> cascade.
>
> Ken
>
> __________________________________________________________
> Ken Stone sasami@...
> Modular Synth PCBs for sale <http://www.cgs.synth.net/>
> Australian Miniature Horses & Ponies
> <http://www.blaze.net.au/~sasami/>
>
>
>

[Non-text portions of this message have been removed]