Yahoo Groups archive

Cgs synth

Index last updated: 2026-04-28 23:16 UTC

Thread

CGS65 CV in MOD

CGS65 CV in MOD

2007-05-21 by hitchindave

Hi guys.

About to build this module, and may want to use +10V CVs as normal.
Is it as simple as swapping the 220K resistor between pins 6 and 7 of the LM358 for a
100K resistor - anyone see any gotchas with doing that?

cheers,

Dave

Re: CGS65 CV in MOD

2007-05-21 by Richard Brewster

Theoretically it should be a 110K, but you probably won't notice much
difference if you use 100K.

-Richard Brewster
http://www.pugix.com

hitchindave wrote:
Show quoted textHide quoted text
> Hi guys.
>
> About to build this module, and may want to use +10V CVs as normal.
> Is it as simple as swapping the 220K resistor between pins 6 and 7 of the LM358 for a
> 100K resistor - anyone see any gotchas with doing that?
>
> cheers,
>
> Dave
>
>
>
>
> The CGS Modular Synth home page: http://www.cgs.synth.net/
>
> Yahoo! Groups Links
>
>
>
>
>

Re: CGS65 CV in MOD

2007-05-21 by sasami@hotkey.net.au

>About to build this module, and may want to use +10V CVs as normal.
>Is it as simple as swapping the 220K resistor between pins 6 and 7 of the
LM358 for a
>100K resistor - anyone see any gotchas with doing that?

Correct.

Ken
_______________________________________________________________________
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.