Synth-DIY Yahoo! Groups Archives

Thread

Adding glide outs to the Programmer Sequencer

2008-01-07 by matthewregula

I would love to add glide outs to each cv output on the Programmer
Sequencer I am about to build. Could I do something as simple as an
add-on board, with copies of the glide circuit from the Super Psycho
LFO??

Thanks.

Re: Adding glide outs to the Programmer Sequencer

2008-01-07 by Scott Deyo

Sure.
And if you don't want to lash them out on protoboard, use Tellun's
MUUB-4 PCB ( www.tellun.com ), or two of Bridechamber's NanoGlide PCBs.
: )

Cheers
Scott Deyo
The Bridechamber
contact@...
www.bridechamber.com

Show quoted textHide quoted text

On Jan 7, 2008, at 9:36 AM, matthewregula wrote:

> I would love to add glide outs to each cv output on the Programmer
> Sequencer I am about to build. Could I do something as simple as an
> add-on board, with copies of the glide circuit from the Super Psycho
> LFO??
>
> Thanks.
>
>
>

[Non-text portions of this message have been removed]

Re: Adding glide outs to the Programmer Sequencer

2008-01-07 by sasami@hotkey.net.au

It would be an easy mod.

Replace the 100k between the op-amps of each mixer with: -330R-|1Mpot|-100k-
with the capacitor connected between the 1M pot and the 100k. The 1M is
wired the same as in the psycho.

Ken

Show quoted textHide quoted text

>I would love to add glide outs to each cv output on the Programmer
>Sequencer I am about to build. Could I do something as simple as an
>add-on board, with copies of the glide circuit from the Super Psycho
>LFO??
>
>Thanks.
>
>
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>
>Yahoo! Groups Links
>
>
>
>

_______________________________________________________________________
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>

Cgs synth

Adding glide outs to the Programmer Sequencer

Adding glide outs to the Programmer Sequencer

Re: Adding glide outs to the Programmer Sequencer

Re: Adding glide outs to the Programmer Sequencer

Move to quarantaine