Synth-DIY Yahoo! Groups Archives

bintic rev. 1.3

2011-05-12 by liamcloyd

hello, i am badly attempting to stuff this pcb. i notice it differs from the pcb shown on the site and calls for slightly different parts.
i am probably overlooking but it appears there are some parts requested on the board which aren't accounted for in the parts list and i also can't find where the last 2 100k resistors go.
the two parts i have found not listed on the parts list are:
330R resistor and two 8k2 resistors.

can anybody help clarify?

thanks so much111111

kindest regards,
liam

Re: bintic rev. 1.3

2011-05-12 by sasami@hotkey.net.au

Follow what is on the PCB itself. If there is a difference, the PCB is
correct. Clearly I have failed to update my parts list.
Sorry.
Ken

Show quoted textHide quoted text

>hello, i am badly attempting to stuff this pcb. i notice it differs from

the pcb shown on the site and calls for slightly different parts.

>i am probably overlooking but it appears there are some parts requested on

the board which aren't accounted for in the parts list and i also can't find
where the last 2 100k resistors go.

>the two parts i have found not listed on the parts list are:
>330R resistor and two 8k2 resistors.
>
>can anybody help clarify?
>
>thanks so much111111
>
>kindest regards,
>liam
>
>
>
>------------------------------------
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>Yahoo! Groups Links
>
>
>
>

_______________________________________________________________________
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>

Cgs synth

bintic rev. 1.3

bintic rev. 1.3

Re: bintic rev. 1.3

Move to quarantaine