Yahoo Groups archive

Cgs synth

Index last updated: 2026-04-28 23:16 UTC

Thread

synare shimmer pots

synare shimmer pots

2003-12-08 by bbluthang

in a compromise between space and tweakability, i ve decide to have
just 4 pots for the shimmer control, rather than a possible 6.
my question is which would be the best positions to fit the 2
resistors (and does size matter?) - R6 & R3, R2 & R5 or R1 & R4?
on one pcb ive soldered 10n caps with the intention of using 500k
pots. the other pcb has 4n7 caps to go with 1m pots.
thanks
andrew

Re: synare shimmer pots

2003-12-08 by sasami@hotkey.net.au

It really doesn't matter. The decision will be whether to have two fixed
resistors on one ring modulator (e.g. R6 & R5), or one each (e.g. R6 & R3),
though I don't know that it will make a lot of difference.

Ken
Show quoted textHide quoted text
>in a compromise between space and tweakability, i ve decide to have
>just 4 pots for the shimmer control, rather than a possible 6.
>my question is which would be the best positions to fit the 2
>resistors (and does size matter?) - R6 & R3, R2 & R5 or R1 & R4?
>on one pcb ive soldered 10n caps with the intention of using 500k
>pots. the other pcb has 4n7 caps to go with 1m pots.
>thanks
>andrew
_______________________________________________________________________
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.