Yahoo Groups archive

Cgs synth

Index last updated: 2026-04-28 23:16 UTC

Thread

really real RM

really real RM

2004-06-19 by charlesosthelder

Hi all!

After much playing around, it seems to me that the 42TM018 won't do
the trick when followed by a simple makeup amp, though it was fine
without. The 42TM002 has a 10K primary and 2K secondary (the DC
resistance is about 600 ohms and 160 ohm respectively) and works
very well as does the smaller 42XL002. Mike Marsh's demo was done
with the latter.

The larger 42TM002 passes more top end than the 42XL002 in the dual
RM that I've built. Both sound really sweet though!

I still have a small pile of Ge diodes - ask and I'll send them free.

Thanks to Ken and Mike for making me revisit this circuit for audio,
too!

Chub

Re: really real RM

2004-06-19 by Mike Marsh

And thanks to Chub for the parts. This is an easy build with lots
of bang for the buck. Highly recommended, as is the simple
wavefolder...

Mike
Show quoted textHide quoted text

--- In cgs_synth@yahoogroups.com, "charlesosthelder"
<osthelder@n...> wrote:
> Hi all!
>
> After much playing around, it seems to me that the 42TM018 won't
do
> the trick when followed by a simple makeup amp, though it was fine
> without. The 42TM002 has a 10K primary and 2K secondary (the DC
> resistance is about 600 ohms and 160 ohm respectively) and works
> very well as does the smaller 42XL002. Mike Marsh's demo was done
> with the latter.
>
> The larger 42TM002 passes more top end than the 42XL002 in the
dual
> RM that I've built. Both sound really sweet though!
>
> I still have a small pile of Ge diodes - ask and I'll send them
free.
>
> Thanks to Ken and Mike for making me revisit this circuit for
audio,
> too!
>
> Chub

Re: really real RM

2004-06-20 by charlesosthelder

I've put a photo of the finished module in the photos section.
Sorry, but I couldn't figure out how to rotate it...

It is safe to say that this may be the only MOTM-format module done
in hot rod suede with tiki god pinstriping.

Chub

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.