Rhodes Chroma Polaris group photo

Yahoo Groups archive

Rhodes Chroma Polaris

Index last updated: 2026-04-28 23:17 UTC

Message

Re: my chropa needs HELP

2006-01-31 by sacateca2001

hi christopher,
it seems like the cable is ok,
but i don't know how it looks like under
the panel..have a look:
http://home.vrweb.de/~harama/polar/polar.htm

so in case the cable is fine, what else can i do
to get this "lower function" butt running?
any suggestions??
harald


--- In chromapolaris@yahoogroups.com, "jenna_pher" <jenna_pher@y...>
wrote:
>
> Y'know...  Funny you should mention that, because I had that exact
> problem.  You may have a bad switch (the membrane), in which case I
> think you're pretty much screwed.  But one thing I did, was to take
> apart my polaris, remove the plastic ribbon cables (not the
> computer-type wire-in-cable cables, but the painted-on jobs that
> typically crack), you should have 4.  You probably will also have to
> remove the screws on the pc boards in the front panel of the synth,
> and all the chrome knobs for the sliders.  Then I bought a Sharpie (r)
> silver marker, and carefully repainted the traces on that cable.  I
> used Sharpie because they haven't got any real dangerous solvents in
> their paint marker.  There is enough aluminum in the sharpie paint to
> act as a decent trace repair.  This may be your problem.  If something
> goes desperately wrong you can always try acetone and a q-tip to clean
> the paint off the ribbon cable, and trim it back using a nice sharp
> pair of scissors.  If your membrane switch is out, you might have to
> develop a repair of some sort (remembering that membrane switches are
> still used).
> 
>   ummm...  THat's about all I can think of.
> 
>   Let me know if that helps at all.  I'm still a polaris novis, but
> I'm really loving mine!
> 
>   Christopher
> --- In chromapolaris@yahoogroups.com, "sacateca2001" <harama@v...>
wrote:
> >
> > hi knob fiddlers,
> > my old darling(100102) needs some help,
> > the left down press-knob doesn't work ,-(
> > (lower function). is there any possibility to remove
> > it, change it or even bridge it?
> > maybe someone knows any older posts about that issue,
> > any quick solution?
> > 
> > regards
> > harald
> >
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.