Re: [chromapolaris] Re: Jupiter6 - Europa
2006-04-06 by Edo
Using Split Mode 4-2 or 2-4, the two voices
non-working are in the zone of the 4 voices.
One of these days I'll go to the LEMI repair center
in Torino, Italy, because I can't repair it by myself.
Anyone has installed the Europa upgrade on the
Jupiter 6? Does it works well?
Edo
Show quoted textHide quoted text
----- Original Message -----From: EdoSent: Wednesday, April 05, 2006 4:06 PMSubject: Re: [chromapolaris] Re: Multitrak - Jupiter6thanks, this evening I'll try to use thr JP6 in split mode (the only thing I didn't tried)Unfortunately the JP6-Europa mailing list doesn't work.----- Original Message -----From: David ClarkeSent: Wednesday, April 05, 2006 1:28 AMSubject: Re: [chromapolaris] Re: Multitrak - Jupiter6> Those wooden ends look great! ...
Agreed! It makes the Multitrak look a bit more like its sibling the
SixTrak.
>> I also have a Jupiter6 with 2 of the 6 voice noti sounding.
>> The boards and cables are in very good conditions,
>> I think the problem are the IC.
>> Anybody had the same problem?
There are a couple things which could be coming into play here. The Jupiter
6 can somewhat be thought of a 2+4 voice board, in that one of the voice
boards handles 2 of the voices, and another one handles the other 4. The
2/4 division also comes into play depending on panel mode (e.g., splits).
The first thing to try to rule in/rule out is whether perhaps the keyboard
is just in '4-voice' mode and/or if there's something wrong with the 2-voice
voice card (in general).
If not already installed, the Europa upgrade for the JP-6 is very
attractive:
www.synthcom.com/Europa
(If nothing else, the JP-6 mailing list noted on that page may be a very
good source of information/support to help diagnose the voice problem).
Good luck with the Polaris velocity issue.