Datacolor User to User Support Group.

--- John...Thank you, thank you thank you!  In following your further 
instructions, I finally found the elusive window.  It just goes to 
show you, "after some more thinking" sometimes pays off.  Thanks 
again.

Matthew Kraus

In colorvision_group@yahoogroups.com, "John Vitollo" <jvlist@...> 
wrote:
>
> --- In colorvision_group@yahoogroups.com, "tech4x5" <mkraus1044@> 
wrote:
> >
> > --- Thanks again John.  My PC window isn't exactly like your 
Mac's, 
> > but I do see the 4 white squares for White Luminance.  What I 
don't 
> > see is a box to view real time changes in the White Luminance 
> > comparing the adjusted changes to ther target value as I change 
the 
> > monitor's brightness controls.  That's what I am missing.  
> 
> After some thinking....
> 
> Maybe you are stuck on this first "White Luminance" window 
expecting to adjust the 
> brightness with the Spyder? It's not here where you use the Spyder 
this window is telling you 
> to adjust the monitor to full brightness via the monitor's controls.
> 
> If so skip this window and go on to the profiling process where the 
software will ask you to 
> attach the Spyder to the monitor. In mid test another "White 
Luminance" window will open 
> and it's here where you adjust the brightness/backlight of the 
monitor while measuring with 
> the Spyder.
>