Datacolor User to User Support Group.

Thanks.  That's what I thought.  I have a good profile for my prints 
and soft proofing, and that's the most important thing.  But I was 
hoping I could make another profile to use at other times when not 
doing photography that would be a little brighter, and then be able 
to just switch back and forth with the Profile Chooser.  But I 
understand this won't work if I've made hardware changes.

Thanks,
Matthew Kraus

--- In colorvision_group@yahoogroups.com, CDTobie@... wrote:
>
> 
> In a message dated 1/18/08 4:59:28 PM, mkraus1044@... writes:
> 
> 
> > I have made a moniter calibration using DVI input and in the 
process
> > made adjustments using the moniter backlight control.  I then make
> > another calibration using slightly different backlight 
adjustments.  I
> > see both profiles in the Profile Chooser.  Can I switch back and 
forth
> > between these two profiles using Profile Chooser if there has 
been a
> > change in the backlight settings?
> > 
> 
> Ideally, no. Not unless you change your hardware setting to reflect 
the 
> different conditions under which the profiles were made. In a 
practical sense a 
> minor change in backlight isn't a crisis, but why do it? Why have 
two profiles at 
> all?
> 
> C. David Tobie
> Product Technology Manager
> Digital Imaging & Home Theater
> Datacolor
> CDTobie@...
> www.datacolor.com/Spyder3
> 
> 
> 
> 
> **************
> Start the year off right.  Easy ways to stay in shape.
>      
> http://body.aol.com/fitness/winter-exercise?
NCID=aolcmp00300000002489
>