- Windows can be made to load the LUT without any help from Datacolor.
See Stop Losing Display Calibration with Windows 7But even after I followed those instructions, my display would not stay calibrated --
I would see flashes of correct calibration, followed by shift back to incorrect calibration.
Then I noticed the note on Intel drivers, and that brought me to: - Intel drivers will override display calibration unless Persistence module is disabled.
(My ThinkPad T420s has Intel 3000 HD plus NVIDIA NVS 4200M.)
See Intel’s Video Drivers Kill Display CalibrationSo I used Sysinternals Autoruns to disable Persistence,
and I now have correct calibration without Ddatacolor software installed.
Hope that helps someone else,
John
---In datacolor_group@yahoogroups.com, <lisamarie.savard@...> wrote :
As far as I know, you should keep the software. On my computers, that's what loads the right colour profile when my computer starts up.
---In datacolor_group@yahoogroups.com, <CDTobie@...> wrote :
Under
Windows, the video corrections need to be loaded at startup by the
Spyder Utility. On the Mac the OS takes care of it. Without the VLUTs,
the color is not corrected, even with the profile applied. There was
some talk about recent versions of Windows doing this at the OS level,
but I've not seen that function to date.
C. David Tobie
C. David Tobie
Senior Project Manager
Workflow & Color
Durst Phototechnik AG
Julius-Durst-Strasse 4
39042 Brixen, Italy
Telefon +39 04 72 81 01 11
Telefax +39 04 72 81 01 32
VAT Nr.: 00848170213
www.durst-online.com
Email: cdtobie@...
skype: CDTobie
Durst Phototechnik AG
Julius-Durst-Strasse 4
39042 Brixen, Italy
Telefon +39 04 72 81 01 11
Telefax +39 04 72 81 01 32
VAT Nr.: 00848170213
www.durst-online.com
Email: cdtobie@...
skype: CDTobie
On May 12, 2016, at 8:20 PM, JN2@... [datacolor_group] <datacolor_group@yahoogroups.com> wrote:
I just calibrated the display on my ThinkPad T420s with a new Spyder4Express.
There was a noticeable color change.
I then uninstalled the Datacolor software, and color appears to have reverted,
even though I've made sure the Spyder4Express profile is selected in Windows.
Must I keep the Datacolor software installed?