Datacolor User to User Support Group.

try this:
http://www.colorvision.com/index_us.php
then support ... 
etc. 
Then register if not already done. 
After that, you'll be 
redirected to a new page where you do select "downloads" .

Giorgio

>----Messaggio originale----
>Da: thomas_manson@...
>Data: 4-
gen-2008 9.37
>A: <colorvision_group@yahoogroups.com>
>Ogg: 
[colorvision_group] Re: actual version aof Spider3Print
>
>I am based 
in the UK, but can't get to colorvision.com to download 
>the non-beta 
version. Whenever I click on Support | Software Updates 
>from the home 
page, it directs me to the colorvision.ch site.
>
>How do I download 
the non-beta version?
>
>Regards,
>Thomas
>
>--- In 
colorvision_group@yahoogroups.com, CDTobie@... wrote:
>>
>> 
>> In a 
message dated 1/1/08 5:46:54 PM, emarkscheffel@... writes:
>> 
>> 
>> 
> 
>> > at the end of october 2007 I downloaded the softare update für 
my
>> > PrintFiXPro hardware named "Spider3PrintSetup.exe" with a size 
of 
>app.
>> > 183 MB. After installation the version 3.0 and the 
library 
>version 1,70
>> > is shown.
>> > 
>> > Today I looked at the 
colorvision.ch page and found a file
>> > Spyder3Print_win.zip.
>> > 
>> > After downloading and unzipping this file I found that it has the
>> > name "Spyder3Print 3.0b3 Setup.exe" and a smaller size and an 
>older
>> > date 30.08.07 than the file downloaded in october above 
mentioned.
>> > 
>> > Here My question: which version is the actual 
version I should 
>use.
>> > 
>> 
>> The version currently listed on 
the US site for download (thus the 
>official 
>> "current version") is 
Spyder3Print_win.zip at 149.63 MB, creationd 
>date of 
>> Nov7, 2007. 
If in doubt, download from colorvision.com, not 
>colorvision.ch. 
Final 
>> beta versions may be identical to release versions, but xN 
cause 
>confusion, so 
>> we try to avoid having them up for public 
download...
>> 
>> C. David Tobie
>> Product Technology Manager
>> 
Digital Imaging & Home Theater
>> Datacolor
>> CDTobie@...
>> www.
datacolor.com/Spyder3
>> 
>> 
>> **************************************
>> See AOL's top 
>> rated recipes (http://food.aol.com/top-rated-
recipes?

>NCID=aoltop00030000000004)
>>
>
>
>

That is exactly the route I took, but when I click on Support, it 
redirects me to the .ch site, and I can't make it not do so. The only 
one on that site is the beta version.

Regards,
Thomas

--- In colorvision_group@yahoogroups.com, Giorgio <gior.cap@...> 
wrote:
>
> 
> 
> try this:
> http://www.colorvision.com/index_us.php
> then support ... 
> etc. 
> Then register if not already done. 
> After that, you'll be 
> redirected to a new page where you do select "downloads" .
> 
> Giorgio
> 
> >----Messaggio originale----
> >Da: thomas_manson@...
> >Data: 4-
> gen-2008 9.37
> >A: <colorvision_group@yahoogroups.com>
> >Ogg: 
> [colorvision_group] Re: actual version aof Spider3Print
> >
> >I am based 
> in the UK, but can't get to colorvision.com to download 
> >the non-beta 
> version. Whenever I click on Support | Software Updates 
> >from the home 
> page, it directs me to the colorvision.ch site.
> >
> >How do I download 
> the non-beta version?
> >
> >Regards,
> >Thomas
> >
> >--- In 
> colorvision_group@yahoogroups.com, CDTobie@ wrote:
> >>
> >> 
> >> In a 
> message dated 1/1/08 5:46:54 PM, emarkscheffel@ writes:
> >> 
> >> 
> >> 
> > 
> >> > at the end of october 2007 I downloaded the softare update 
für 
> my
> >> > PrintFiXPro hardware named "Spider3PrintSetup.exe" with a size 
> of 
> >app.
> >> > 183 MB. After installation the version 3.0 and the 
> library 
> >version 1,70
> >> > is shown.
> >> > 
> >> > Today I looked at the 
> colorvision.ch page and found a file
> >> > Spyder3Print_win.zip.
> >> > 
> >> > After downloading and unzipping this file I found that it has 
the

> >> > name "Spyder3Print 3.0b3 Setup.exe" and a smaller size and an 
> >older
> >> > date 30.08.07 than the file downloaded in october above 
> mentioned.
> >> > 
> >> > Here My question: which version is the actual 
> version I should 
> >use.
> >> > 
> >> 
> >> The version currently listed on 
> the US site for download (thus the 
> >official 
> >> "current version") is 
> Spyder3Print_win.zip at 149.63 MB, creationd 
> >date of 
> >> Nov7, 2007. 
> If in doubt, download from colorvision.com, not 
> >colorvision.ch. 
> Final 
> >> beta versions may be identical to release versions, but xN 
> cause 
> >confusion, so 
> >> we try to avoid having them up for public 
> download...
> >> 
> >> C. David Tobie
> >> Product Technology Manager
> >> 
> Digital Imaging & Home Theater
> >> Datacolor
> >> CDTobie@
> >> www.
> datacolor.com/Spyder3
> >> 
> >> 
> >> **************************************
> >> See AOL's top 
> >> rated recipes (http://food.aol.com/top-rated-
> recipes?
> >NCID=aoltop00030000000004)
> >>
> >
> >
> >
>

This sounds strange....
If you type www. colorvision......./us.php, 
"us" stays for United States: you should see this site instead of 
Global site (www.colorvision.com only).

On the menu tools (Internet 
Explorer): internet options---> temporary files: delete temp. files, 
delete cookies, delete browsing history. 
Now try again, but here: http:
//www.colorvision.com/index_us.php
and not here www.colorvision.com .  
Maybe a cookie is redirecting you to *.ch site        

Giorgio


>----
Messaggio originale----
>Da: thomas_manson@...
>Data: 4-gen-
2008 15.10
>A: <colorvision_group@yahoogroups.com>
>Ogg: R: 
[colorvision_group] Re: actual version aof Spider3Print
>
>That is 
exactly the route I took, but when I click on Support, it 
>redirects 
me to the .ch site, and I can't make it not do so. The only 
>one on 
that site is the beta version.
>
>Regards,
>Thomas
>
>--- In 
colorvision_group@yahoogroups.com, Giorgio <gior.cap@...> 
>wrote:
>>
>> 
>> 
>> try this:
>> http://www.colorvision.com/index_us.php
>> then 
support ... 
>> etc. 
>> Then register if not already done. 
>> After 
that, you'll be 
>> redirected to a new page where you do select 
"downloads" .
>> 
>> Giorgio
>> 
>> >----Messaggio originale----
>> 
>Da: thomas_manson@...
>> >Data: 4-
>> gen-2008 9.37
>> >A: 
<colorvision_group@yahoogroups.com>
>> >Ogg: 
>> [colorvision_group] 
Re: actual version aof Spider3Print
>> >
>> >I am based 
>> in the UK, 
but can't get to colorvision.com to download 
>> >the non-beta 
>> 
version. Whenever I click on Support | Software Updates 
>> >from the 
home 
>> page, it directs me to the colorvision.ch site.
>> >
>> >How 
do I download 
>> the non-beta version?
>> >
>> >Regards,
>> >Thomas
>> 
>
>> >--- In 
>> colorvision_group@yahoogroups.com, CDTobie@ wrote:
>> 
>>
>> >> 
>> >> In a 
>> message dated 1/1/08 5:46:54 PM, 
emarkscheffel@ writes:
>> >> 
>> >> 
>> >> 
>> > 
>> >> > at the end of 
october 2007 I downloaded the softare update 
>für 
>> my
>> >> > 
PrintFiXPro hardware named "Spider3PrintSetup.exe" with a size 
>> of 
>> >app.
>> >> > 183 MB. After installation the version 3.0 and the 
>> 
library 
>> >version 1,70
>> >> > is shown.
>> >> > 
>> >> > Today I 
looked at the 
>> colorvision.ch page and found a file
>> >> > 
Spyder3Print_win.zip.
>> >> > 
>> >> > After downloading and unzipping 
this file I found that it has 
>the
>> >> > name "Spyder3Print 3.0b3 
Setup.exe" and a smaller size and an 
>> >older
>> >> > date 30.08.07 
than the file downloaded in october above 
>> mentioned.
>> >> > 
>> >> 
> Here My question: which version is the actual 
>> version I should 
>> >use.
>> >> > 
>> >> 
>> >> The version currently listed on 
>> the 
US site for download (thus the 
>> >official 
>> >> "current version") 
is 
>> Spyder3Print_win.zip at 149.63 MB, creationd 
>> >date of 
>> >> 
Nov7, 2007. 
>> If in doubt, download from colorvision.com, not 
>> 
>colorvision.ch. 
>> Final 
>> >> beta versions may be identical to 
release versions, but xN 
>> cause 
>> >confusion, so 
>> >> we try to 
avoid having them up for public 
>> download...
>> >> 
>> >> C. David 
Tobie
>> >> Product Technology Manager
>> >> 
>> Digital Imaging & Home 
Theater
>> >> Datacolor
>> >> CDTobie@
>> >> www.
>> datacolor.
com/Spyder3
>> >> 
>> >> 
>> >> **************************************
>> >> See AOL's top 
>> >> rated recipes (http://food.aol.com/top-
rated-

>> recipes?
>> >NCID=aoltop00030000000004)
>> >>
>> >
>> >
>> >
>>
>
>
>

Thanks Giorgio, but after having tried your suggestion I still have no luck. I can get the us site, but once I try to get into the support section it goes directly to the ch site. Very annoying.

Peter (in Denmark)

 

 

===========================

 

From: colorvision_group@yahoogroups.com [mailto:colorvision_group@yahoogroups.com] On Behalf Of Giorgio
Sent: 4. januar 2008 15:55
To: colorvision_group@yahoogroups.com
Subject: R: [colorvision_group] Re: actual version aof Spider3Print

 


This sounds strange....
If you type www. colorvision......./us.php, 
"us" stays for United States: you should see this site instead of 
Global site (www.colorvision.com only).

On the menu tools (Internet 
Explorer): internet options---> temporary files: delete temp. files, 
delete cookies, delete browsing history. 
Now try again, but here: http:
//www.colorvision.com/index_us.php
and not here www.colorvision.com . 
Maybe a cookie is redirecting you to *.ch site 

Giorgio

>----
Messaggio originale----
>Da: thomas_manson@... <mailto:thomas_manson%40hotmail.com> 
>Data: 4-gen-
2008 15.10
>A: <colorvision_group@yahoogroups.com <mailto:colorvision_group%40yahoogroups.com> >
>Ogg: R: 
[colorvision_group] Re: actual version aof Spider3Print
>
>That is 
exactly the route I took, but when I click on Support, it 
>redirects 
me to the .ch site, and I can't make it not do so. The only 
>one on 
that site is the beta version.
>
>Regards,
>Thomas
>
>--- In 
colorvision_group@yahoogroups.com <mailto:colorvision_group%40yahoogroups.com> , Giorgio <gior.cap@...> 
>wrote:
>>
>> 
>> 
>> try this:
>> http://www.colorvision.com/index_us.php
>> then 
support ... 
>> etc. 
>> Then register if not already done. 
>> After 
that, you'll be 
>> redirected to a new page where you do select 
"downloads" .
>> 
>> Giorgio
>> 
>> >----Messaggio originale----
>> 
>Da: thomas_manson@...
>> >Data: 4-
>> gen-2008 9.37
>> >A: 
<colorvision_group@yahoogroups.com <mailto:colorvision_group%40yahoogroups.com> >
>> >Ogg: 
>> [colorvision_group] 
Re: actual version aof Spider3Print
>> >
>> >I am based 
>> in the UK, 
but can't get to colorvision.com to download 
>> >the non-beta 
>> 
version. Whenever I click on Support | Software Updates 
>> >from the 
home 
>> page, it directs me to the colorvision.ch site.
>> >
>> >How 
do I download 
>> the non-beta version?
>> >
>> >Regards,
>> >Thomas
>> 
>
>> >--- In 
>> colorvision_group@yahoogroups.com <mailto:colorvision_group%40yahoogroups.com> , CDTobie@ wrote:
>> 
>>
>> >> 
>> >> In a 
>> message dated 1/1/08 5:46:54 PM, 
emarkscheffel@ writes:
>> >> 
>> >> 
>> >> 
>> > 
>> >> > at the end of 
october 2007 I downloaded the softare update 
>für 
>> my
>> >> > 
PrintFiXPro hardware named "Spider3PrintSetup.exe" with a size 
>> of 
>> >app.
>> >> > 183 MB. After installation the version 3.0 and the 
>> 
library 
>> >version 1,70
>> >> > is shown.
>> >> > 
>> >> > Today I 
looked at the 
>> colorvision.ch page and found a file
>> >> > 
Spyder3Print_win.zip.
>> >> > 
>> >> > After downloading and unzipping 
this file I found that it has 
>the
>> >> > name "Spyder3Print 3.0b3 
Setup.exe" and a smaller size and an 
>> >older
>> >> > date 30.08.07 
than the file downloaded in october above 
>> mentioned.
>> >> > 
>> >> 
> Here My question: which version is the actual 
>> version I should 
>> >use.
>> >> > 
>> >> 
>> >> The version currently listed on 
>> the 
US site for download (thus the 
>> >official 
>> >> "current version") 
is 
>> Spyder3Print_win.zip at 149.63 MB, creationd 
>> >date of 
>> >> 
Nov7, 2007. 
>> If in doubt, download from colorvision.com, not 
>> 
>colorvision.ch. 
>> Final 
>> >> beta versions may be identical to 
release versions, but xN 
>> cause 
>> >confusion, so 
>> >> we try to 
avoid having them up for public 
>> download...
>> >> 
>> >> C. David 
Tobie
>> >> Product Technology Manager
>> >> 
>> Digital Imaging & Home 
Theater
>> >> Datacolor
>> >> CDTobie@
>> >> www.
>> datacolor.
com/Spyder3
>> >> 
>> >> 
>> >> **************************************
>> >> See AOL's top 
>> >> rated recipes (http://food.aol.com/top-
rated-

>> recipes?
>> >NCID=aoltop00030000000004)
>> >>
>> >
>> >
>> >
>>
>
>
>

I tried clearing all my cookies, as well as on a new machine that I 
had never connected to either site on, and I still got to the .ch 
site when I tried to go to the support site.

Can you share the url to the login page for the US support site? 

And I did start at http://www.colorvision.com/index_us.php.

Regards,
Thomas

--- In colorvision_group@yahoogroups.com, Giorgio <gior.cap@...> 
wrote:
>
> 
> This sounds strange....
> If you type www. colorvision......./us.php, 
> "us" stays for United States: you should see this site instead of 
> Global site (www.colorvision.com only).
> 
> On the menu tools (Internet 
> Explorer): internet options---> temporary files: delete temp. 
files, 

> delete cookies, delete browsing history. 
> Now try again, but here: http:
> //www.colorvision.com/index_us.php
> and not here www.colorvision.com .  
> Maybe a cookie is redirecting you to *.ch site        
> 
> Giorgio
> 
> 
> >----
> Messaggio originale----
> >Da: thomas_manson@...
> >Data: 4-gen-
> 2008 15.10
> >A: <colorvision_group@yahoogroups.com>
> >Ogg: R: 
> [colorvision_group] Re: actual version aof Spider3Print
> >
> >That is 
> exactly the route I took, but when I click on Support, it 
> >redirects 
> me to the .ch site, and I can't make it not do so. The only 
> >one on 
> that site is the beta version.
> >
> >Regards,
> >Thomas
> >
> >--- In 
> colorvision_group@yahoogroups.com, Giorgio <gior.cap@> 
> >wrote:
> >>
> >> 
> >> 
> >> try this:
> >> http://www.colorvision.com/index_us.php
> >> then 
> support ... 
> >> etc. 
> >> Then register if not already done. 
> >> After 
> that, you'll be 
> >> redirected to a new page where you do select 
> "downloads" .
> >> 
> >> Giorgio
> >> 
> >> >----Messaggio originale----
> >> 
> >Da: thomas_manson@
> >> >Data: 4-
> >> gen-2008 9.37
> >> >A: 
> <colorvision_group@yahoogroups.com>
> >> >Ogg: 
> >> [colorvision_group] 
> Re: actual version aof Spider3Print
> >> >
> >> >I am based 
> >> in the UK, 
> but can't get to colorvision.com to download 
> >> >the non-beta 
> >> 
> version. Whenever I click on Support | Software Updates 
> >> >from the 
> home 
> >> page, it directs me to the colorvision.ch site.
> >> >
> >> >How 
> do I download 
> >> the non-beta version?
> >> >
> >> >Regards,
> >> >Thomas
> >> 
> >
> >> >--- In 
> >> colorvision_group@yahoogroups.com, CDTobie@ wrote:
> >> 
> >>
> >> >> 
> >> >> In a 
> >> message dated 1/1/08 5:46:54 PM, 
> emarkscheffel@ writes:
> >> >> 
> >> >> 
> >> >> 
> >> > 
> >> >> > at the end of 
> october 2007 I downloaded the softare update 
> >für 
> >> my
> >> >> > 
> PrintFiXPro hardware named "Spider3PrintSetup.exe" with a size 
> >> of 
> >> >app.
> >> >> > 183 MB. After installation the version 3.0 and the 
> >> 
> library 
> >> >version 1,70
> >> >> > is shown.
> >> >> > 
> >> >> > Today I 
> looked at the 
> >> colorvision.ch page and found a file
> >> >> > 
> Spyder3Print_win.zip.
> >> >> > 
> >> >> > After downloading and unzipping 
> this file I found that it has 
> >the
> >> >> > name "Spyder3Print 3.0b3 
> Setup.exe" and a smaller size and an 
> >> >older
> >> >> > date 30.08.07 
> than the file downloaded in october above 
> >> mentioned.
> >> >> > 
> >> >> 
> > Here My question: which version is the actual 
> >> version I should 
> >> >use.
> >> >> > 
> >> >> 
> >> >> The version currently listed on 
> >> the 
> US site for download (thus the 
> >> >official 
> >> >> "current version") 
> is 
> >> Spyder3Print_win.zip at 149.63 MB, creationd 
> >> >date of 
> >> >> 
> Nov7, 2007. 
> >> If in doubt, download from colorvision.com, not 
> >> 
> >colorvision.ch. 
> >> Final 
> >> >> beta versions may be identical to 
> release versions, but xN 
> >> cause 
> >> >confusion, so 
> >> >> we try to 
> avoid having them up for public 
> >> download...
> >> >> 
> >> >> C. David 
> Tobie
> >> >> Product Technology Manager
> >> >> 
> >> Digital Imaging & Home 
> Theater
> >> >> Datacolor
> >> >> CDTobie@
> >> >> www.
> >> datacolor.
> com/Spyder3
> >> >> 
> >> >> 
> >> >> **************************************
> >> >> See AOL's top 
> >> >> rated recipes (http://food.aol.com/top-
> rated-
> >> recipes?
> >> >NCID=aoltop00030000000004)
> >> >>
> >> >
> >> >
> >> >
> >>
> >
> >
> >
>

If I'm right, you can now download from *.ch: filesize is 149,63MB 
(same size from *.us)

What David said was that now you can get same 
(right) file from two differents URLs . ONLY the NAME of the version is 
different, not the contents.
Isn'it, David? 
Cheers
Giorgio 


>----
Messaggio originale----
>Da: thomas_manson@...
>Data: 4-gen-
2008 17.49
>A: <colorvision_group@yahoogroups.com>
>Ogg: 
[colorvision_group] Re: actual version aof Spider3Print
>
>So if I 
understand you correctly, I should either use the beta or 
>revert to 
version 2? Which of those two options would you recommend?
>
>Regards,
>Thomas
>
>--- In colorvision_group@yahoogroups.com, CDTobie@... wrote:
>>
>> 
>> In a message dated 1/4/08 8:04:39 AM, thomas_manson@... 
writes:
>> 
>> 
>> > I am based in the UK, but can't get to colorvision.
com to download
>> > the non-beta version. Whenever I click on Support 
| Software 
>Updates
>> > from the home page, it directs me to the 
colorvision.ch site.
>> > 
>> > How do I download the non-beta version?
>> > 
>> 
>> We have recently integrated our downloads, so that either 
site 
>should now 
>> take you to the same list of downloads. What we 
haven't done is to 
>clean up the 
>> version numbers to avoid 
confusion. That should occur soon.
>> 
>> C. David Tobie
>> Product 
Technology Manager
>> Digital Imaging & Home Theater
>> Datacolor
>> 
CDTobie@...
>> www.datacolor.com/Spyder3
>> 
>> 
>> **************
>> 
Start the year off right.  Easy ways 
>> to stay in shape.
>>      
>> 
http://body.aol.com/fitness/winter-exercise?

>NCID=aolcmp00300000002489
>>
>
>
>

I downloaded that one, and in the zip file is the beta setup file - 
its called Spyder3Print 3.0b3 Setup.exe. When you install it it 
clearly says it is a beta product.

Regards,
Thomas

--- In colorvision_group@yahoogroups.com, Giorgio <gior.cap@...> 
wrote:
>
> 
> If I'm right, you can now download from *.ch: filesize is 149,63MB 
> (same size from *.us)
> 
> What David said was that now you can get same 
> (right) file from two differents URLs . ONLY the NAME of the 
version is 

> different, not the contents.
> Isn'it, David? 
> Cheers
> Giorgio 
> 
> 
> >----
> Messaggio originale----
> >Da: thomas_manson@...
> >Data: 4-gen-
> 2008 17.49
> >A: <colorvision_group@yahoogroups.com>
> >Ogg: 
> [colorvision_group] Re: actual version aof Spider3Print
> >
> >So if I 
> understand you correctly, I should either use the beta or 
> >revert to 
> version 2? Which of those two options would you recommend?
> >
> >Regards,
> >Thomas
> >
> >--- In colorvision_group@yahoogroups.com, CDTobie@ wrote:
> >>
> >> 
> >> In a message dated 1/4/08 8:04:39 AM, thomas_manson@ 
> writes:
> >> 
> >> 
> >> > I am based in the UK, but can't get to colorvision.
> com to download
> >> > the non-beta version. Whenever I click on Support 
> | Software 
> >Updates
> >> > from the home page, it directs me to the 
> colorvision.ch site.
> >> > 
> >> > How do I download the non-beta version?
> >> > 
> >> 
> >> We have recently integrated our downloads, so that either 
> site 
> >should now 
> >> take you to the same list of downloads. What we 
> haven't done is to 
> >clean up the 
> >> version numbers to avoid 
> confusion. That should occur soon.
> >> 
> >> C. David Tobie
> >> Product 
> Technology Manager
> >> Digital Imaging & Home Theater
> >> Datacolor
> >> 
> CDTobie@
> >> www.datacolor.com/Spyder3
> >> 
> >> 
> >> **************
> >> 
> Start the year off right.  Easy ways 
> >> to stay in shape.
> >>      
> >> 
> http://body.aol.com/fitness/winter-exercise?
> >NCID=aolcmp00300000002489
> >>
> >
> >
> >
>

> 
> I downloaded that one, and in the zip file is the beta setup file -
> its called Spyder3Print 3.0b3 Setup.exe. When you install it it
> clearly says it is a beta product.

Thomas,
waiting for David, if you  like, I may DL it and share: have you a p2p 
sw? or a ftp address?

Giorgio

> Regards,
> Thomas
> 
> --- In colorvision_group@yahoogroups.com 
> <mailto:colorvision_group%40yahoogroups.com>, Giorgio <gior.cap@...>
> wrote:
>  >
>  >
>  > If I'm right, you can now download from *.ch: filesize is 149,63MB
>  > (same size from *.us)
>  >
>  > What David said was that now you can get same
>  > (right) file from two differents URLs . ONLY the NAME of the
> version is
>  > different, not the contents.
>  > Isn'it, David?
>  > Cheers
>  > Giorgio

Wait until we've given one more notification here before you download  
anything, we're still
in the process of resolving this.


David Miller
Senior Software Developer, Digital Color Solutions
Colorvision

I thought I liked that calibration system....

Now, I am testing it but I'm not satisfied: either soft proof and prints 
   are bad in respect of files printed with canned profile.

This is my actual setup:

Printer Pixma IP 4000
Original Canon inks
Canon Paper Pro
printfix pro (updated to 2.0)
monitor Eizo S1931 profiled with Spyder 2
Editing sw Photoshop CS2

printing profiles:
- Canon canned for Canon pro paper
- Printfix Pro 729 patches (all default settings)

both Rendering colorimetric (softproof is within the gamut)

Testing the profiles with GamutVision (comparision with input Adobe RGB 
1998) I see that canned profile is better than Printfix one, there are 
remarkable differencies in high and low light, but some more also: look 
at the values of lightness (ideal and mesured) and the differencies.

Input AdobeRBG 1998 output Canon canned profile:
http://aycu40.webshots.com/image/40039/2004033155519683753_rs.jpg

Input AdobeRBG 1998 output Printfix pro profile
http://aycu38.webshots.com/image/38797/2004021994459015991_rs.jpg

I was assuming that "fine tuning" with settings should have been REALLY 
fine tune. This is not....
I think  that there are too many alteration.

Many people says that Printfix is a great system: maybe I missed anything?
what's your opinion? any syggestion?

Tks
Giorgio

p.s: I also have tested Ilford (galerie classic gloss) and HP  photo 
paper plus glossy. But the result was even worst.

Hello,

any news? On colorvision.com leads the download of Spider3Print still 
to the wrong? beta version.

Best regards
Erhard



--- In colorvision_group@yahoogroups.com, David Miller <dm2363@...> 
wrote:
>
> Wait until we've given one more notification here before you 
download  

> anything, we're still
> in the process of resolving this.
> 
> 
> David Miller
> Senior Software Developer, Digital Color Solutions
> Colorvision
>