Yahoo Groups archive

Datacolor User to User Support Group.

Index last updated: 2026-04-28 23:18 UTC

Thread

profiling a Dell Ultrasharp U2410 (OT)

profiling a Dell Ultrasharp U2410 (OT)

2009-11-14 by chriscalvert@paradise.net.nz

I have profiled mine exactly the same as my earlier 2408WFP. Wound the brilliance back to either 5 or 10 and profiled as usual. From memory had a luminance value about 95. Using Spyder3Elite with latest software. And it is essential to either use the monitor in a low light situation or in my case with a very large self manf hood and the blinds down.


Regards
Chris Calvert

Re: profiling a Dell Ultrasharp U2410 (OT)

2009-11-15 by bwinkjet

Hi Chris,
Thanks.  I had read on another forum someone had trouble getting the profile to apply properly.  Looks like a pretty good monitor on paper.
Paul

--- In datacolor_group@yahoogroups.com, chriscalvert@... wrote:
Show quoted textHide quoted text
>
> I have profiled mine exactly the same as my earlier 2408WFP. Wound the 
> brilliance back to either 5 or 10 and profiled as usual. From memory had a 
> luminance value about 95. Using Spyder3Elite with latest software. And it is 
> essential to either use the monitor in a low light situation or in my case with 
> a very large self manf hood and the blinds down.
> 
> 
> Regards
> Chris Calvert
>

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.