Disklavier

No.  Itj ust brings the low line levels of the DKC-850 up to enough to drive
an average amp line input jack (and a bit more).

  _____  

From: disklavier@yahoogroups.com [mailto:disklavier@yahoogroups.com] On
Behalf Of n9505l
Sent: Friday, March 15, 2013 2:57 PM
To: disklavier@yahoogroups.com
Subject: [disklavier] Re: Connect DKC 850 to my Home Theatre Speakers


  

Does the booster eliminate the need for amplified speakers?

--- In disklavier@yahoogroups.com <mailto:disklavier%40yahoogroups.com> ,
"sjhart110110" <sjhart110@...> wrote:
>
> 
> Wonder if this was done because of the integrated Amps on many pianos are
pro audio types which don't require as much input. Output is plenty loud on
my DC3A... SJ
> --- In disklavier@yahoogroups.com <mailto:disklavier%40yahoogroups.com> ,
"Phil Becker" <phil@> wrote:
> >
> > This is indeed a "feature" of the DKC-850, the audio outputs are about
half
> > the level they were on older contollers. 
> > 
> > A booster does fix the issue.
> > 
> > _____ 
> > 
> > From: disklavier@yahoogroups.com <mailto:disklavier%40yahoogroups.com>
[mailto:disklavier@yahoogroups.com <mailto:disklavier%40yahoogroups.com> ]
On
> > Behalf Of Donal Galvin
> > Sent: Thursday, March 14, 2013 10:43 AM
> > To: disklavier@yahoogroups.com <mailto:disklavier%40yahoogroups.com> 
> > Subject: Re: [disklavier] Connect DKC 850 to my Home Theatre Speakers
> > 
> > 
> > 
> > 
> > 
> > I am using a cable. I just can't believe the phono outputs are that low
on
> > the dkc 850. I am going to look at a stereo line booster which may do
the
> > job.
> > 
> > Regards 
> > 
> > Donal
> > 
> > 
> > On 14 Mar 2013, at 16:39, Adrian Thomas <mangez@> wrote:
> > 
> > 
> > 
> > 
> > 
> > Hi,
> > 
> > if you're using a WiFi adaptor connected to the LAN port on the piano,
the
> > problem is likely to be with the WiFi system. If you're connecting via
> > cable, check the volume/balance settings on the piano. If all that is
OK,
> > you might have to try a different connection on your AV Receiver or use
a
> > Mic pre-amp before going into the receiver.
> > 
> > Adrian Thomas
> > 
> > On Mar 14 2013, discodonal wrote: 
> > 
> > >I want to use my surround sound speakers via my Onkyo Av Receiever so I
> > took the audio output from the DKC and sent it to an input on the Onkyo
but
> > the volume is so low I have to max out the Onkyo to hear it. The signal
> > strength is very weak. Am I doing something wrong ?
> > >
> > >
> > >
> > >------------------------------------
> > >
> > >To Post a message to the group, send it to: disklavier@
> > >
> > >To Post a private message to Todd Muncy, the group's founder and
moderator,
> > send it to:
> > >disklavier-owner@
> > >
> > >To reach our group's web site go to:
> > >http://Yahoogroups.com/group/disklavier
> > >
> > >THINKING OF LEAVING THE GROUP?
> > >If you are thinking of unsubcribing because you are getting too much
mail,
> > go the the web site and change your email delivery option instead. That
will
> > fix the problem, while maintaining your access to the group. If you
insist
> > on leaving us completely send a blank email to:
> > >disklavier-unsubscribe@ 
> > >
> > >Know someone who wants to join? Have them send a blank email to:
> > >disklavier-subscribe@ or give them this link:
> > >http://Yahoogroups.com/group/disklavier/join 
> > >Yahoo! Groups Links
> > >
> > >
> > >
> > >
> >
>