Yahoo Groups archive

Disklavier

Index last updated: 2026-04-28 23:20 UTC

Message

Re: [disklavier] Tuning

2013-06-14 by Donal Galvin

I need to calibrate the pedal as i am getting pass code 02 ??

Sent from my iPhone

On 14 Jun 2013, at 12:42, Adrian Thomas <mangez@...> wrote:

> I would agree with Carol. Sometimes, the power applied to the hammers during calibration can throw out the tuning, so I would always stick with the sequence of 1: repair & regulate anything mechanical, 2: calibrate, 3: tune.
> 
> Adrian Thomas
> 
> On Jun 13 2013, Donal Galvin wrote: 
> 
> >Thanks Carol, the problem is that there are no Disklavier technicians in Ireland but I do have a Yamaha Qualified Acoustic technician to go over the mechanical end. 
> >
> >Sent from my iPhone
> >
> >On 13 Jun 2013, at 13:30, Carol Beigel wrote:
> >
> >> They are both done at the same service call. The technician runs the calibration, then tunes the piano. Many times I have tuned the piano first if it needed pitch correction, run the calibration, then retuned the piano to increase stability of the tuning.
> >> 
> >> Carol Beigel
> >> 
> >> On Jun 12, 2013, at 5:18 PM, discodonal wrote:
> >> 
> >> > Should I get my piano tuned/serviced before or after Disklavier calibration maintenance 
> >> > 
> >> > 
> >> > 
> >> > ------------------------------------
> >> > 
> >> > To Post a message to the group, send it to: disklavier@...
> >> > 
> >> > To Post a private message to Todd Muncy, the group's founder and moderator, send it to:
> >> > disklavier-owner@...
> >> > 
> >> > To reach our group's web site go to:
> >> > http://Yahoogroups.com/group/disklavier
> >> > 
> >> > THINKING OF LEAVING THE GROUP?
> >> > If you are thinking of unsubcribing because you are getting too much mail, go the the web site and change your email delivery option instead. That will fix the problem, while maintaining your access to the group. If you insist on leaving us completely send a blank email to:
> >> > disklavier-unsubscribe@... 
> >> > 
> >> > Know someone who wants to join? Have them send a blank email to:
> >> > disklavier-subscribe@... or give them this link:
> >> > http://Yahoogroups.com/group/disklavier/join 
> >> > Yahoo! Groups Links
> >> > 
> >> > 
> >> > 
> >> 
> >> 
> >
> 
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.