Disklavier

I haven't tried yet, since there is already a dedicated PC next to my Disklavier.  I suppose I could try my laptop in there.  I'll give it a shot and report back tomorrow.


________________________________
 From: Gilbert Daniel Je <sdaniel@...>
To: "disklavier@yahoogroups.com" <disklavier@yahoogroups.com> 
Sent: Saturday, August 31, 2013 7:30 PM
Subject: Re: [disklavier] DisklavierTV not working for me
 


  
Kevin,

Didn't realize that was in the guide now!  When I beta tested it there was no mention of if.  Just out of curiosity, have you or can you try a different PC?

Gilbert


On Aug 31, 2013, at 6:01 PM, Kevin Goroway <kgoroway@...> wrote:


  
>I appreciate the response but I already tried that since it was in the setup guide...
>
>Gilbert Daniel Je <sdaniel@...> wrote:
>
>  
>I had the same problem.  I fixed it by turning off all the 'enhancements' that my sound card had (Dell XPS laptop with sound blaster audio card).  Bass boost, aural expansion, range boost, etc.  I guess it modified the signal so much that the disklavier couldn't recognize it.
>
>
>Hope this helps,
>
>
>Gilbert Daniel, Jr.
>
>Sent from my iPhone
>
>On Aug 31, 2013, at 4:43 PM, <kgoroway@...m> wrote:
>
>
>  
>>I finally got around to trying out DisklavierTV.  Updated my MarkIV to 4.2, updated the PRC, got the computer hooked up correctly, etc.
>>
>>
>>Video plays, I hear the audio, but my keys don't move (well, very very occasionally I'll catch one moving...).
>>
>>
>>I confirmed that audio seems to come over the left channel, and the right channel seems to include the encoded (sounds like static) information for the MIDI.  When I swap left and right channels, I can hear the static, so I know that the cable is fine.  The "static" is somewhat lower in volume then the audio, but I suspect that the piano ought to be able to understand it just fine...Any other troubleshooting tips?  I confirmed via Disklavier Radio that my keys do actually move when playing back MIDI (sometimes that stops working, and the piano needs a reboot).
>>
>>
>>Thanks.
>>-Kevin