Disklavier

I would keep the control unit, even though calibration can be done through the DKC-850.

Bill

Sent from my iPhone.

On Sep 11, 2013, at 10:53 PM, Donal Galvin <discodonal@...> wrote:

Would you not keep the box for calibration and maintenance ?

Sent from my iPhone

On 11 Sep 2013, at 18:59, jmorris651@... wrote:

>  
> I apologize if this message is inappropriate or incorrect as I am brand new to this group and am also new to Yahoo Groups in general. 
> 
> 
> 
> I will shortly have a DKC500RXG controller available as I just ordered the DKC850.
> 
> 
> 
> Joe 
> 
> 
> 
> --- In disklavier@yahoogroups.com, <zed123@...> wrote:
> 
> 
> I have a Mark II and I would love to connect it directly to a DKC850 without using the midi cables, which is what I believe you have been able to do with the 9 to 15 pin adaptor.
> Can you please tell me what I need to do to make my Mark II be like a Mark IIXG that can be controlled directly by the DKC850 by  using the 9 to 15 pin adaptor instead of the midi cables which would limit its  usefullness, and it would require that the DKC100 controller for the Mark II still be used via midi?
>  
> I appreciate as much detail as you can give since I had never heard of this option before.
>  
> Thanks.
>  
> Dan
>  
> ----- Original Message -----
> From: fracture
> To: disklavier@yahoogroups.com
> Sent: Saturday, August 31, 2013 2:21 AM
> Subject: RE: [disklavier] RE: dkc500rxg
> 
> I purchased the 9 to 15 pin adaptor and the hammer sensor board to update my mark ii  to a iixg but I need a 500 controller to write to the new hammer sensor board and pk Ctrl boards.   A that time I will purchase the Dkc 850. Which will compete the update and allow Internet radio. 
> Essentially I am updating my mark ii to a iixg and then updating to 850. Will not have silent play or smart keys but will have Internet and Internet radio. 
> 
> 
> Sent from my Samsung Galaxy S®4
> 
> 
> 
> -------- Original message --------
> From: rightnightboy@... 
> Date: 08/31/2013 12:39 AM (GMT-05:00) 
> To: disklavier@yahoogroups.com 
> Subject: [disklavier] RE: dkc500rxg 
> 
> 
>  
> Hi, do you have a markII or a markIIxg ? The latter allows I believe, the internet radio option of the DKC850 (I have it installed on my mpx1 wich is initially with DKC500R and MarkIIXG silent . For which purpose do you wish to have an xg controller for a week ?
> 
> 
> 
> --- In disklavier@yahoogroups.com, <fracture@...> wrote:
> 
> Seems the dkc 850 will not get internet radio on my Mark ii.  So does anyone have and old dkc500rxg (Mark iixg) controller that has be upgraded that I might be able to purchase or borrow for a week.
>