Disklavier

Thanks Bill,

 

That works better than I expected. To begin with the volume output from the OMNI is louder than the analog output even though I kept it tied to the main volume. But putting it on 127 was even much better and more acceptable. Nicely, the volume of the OMNI output is still controlled by the TG balance. So it is easily managed.

 

Thanks so much.

 

Joe

 

From: disklavier@yahoogroups.com [mailto:disklavier@yahoogroups.com] On Behalf Of Bill Gmail
Sent: Wednesday, September 18, 2013 4:41 PM
To: disklavier@yahoogroups.com
Cc: <disklavier@yahoogroups.com>
Subject: Re: [disklavier] DKC-850 TG Volume Issue

 

  

 

Joe,

 

I believe that the work around would be to use the Omni Outs and set them to a fixed level (Setup -> Audio I/O -> Omni Out Vol).

 

Bill

 

Sent from my iPad


On Sep 18, 2013, at 8:55 AM, <jmorris651@...> wrote:

  

Yesterday I picked up my new DKC-850 to replace my MarkII XG unit. The replacement went without a hitch, the internet connection works, and I was able to update to the latest firmware. I have one issue that I cannot resolve. The volume for the TG is so low I can hardly hear it. Even with the TG balance set up as high as it will go and the volume on the powered speakers as high as they will go too. This was not an issue with the previous unit at all.

 

Has anyone run into this and have a solution? I do have a call into the local Yamaha tech.

 

Thanks

 

Joe