Yahoo Groups archive

Disklavier

Index last updated: 2026-04-28 23:20 UTC

Message

Re: [disklavier] RE: D-Radio is shown in Japanese only

2013-10-07 by Bill Brandom

I believe all English DisklavierRadio (also called PianoRadio) is streamed from the US. Japanese DisklavierRadio is streamed from Japan.

Bill

Sent from my iPhone.

On Oct 7, 2013, at 7:58 AM, Adrian Thomas <mangez@freenetname.co.uk> wrote:

Thanks for your input Bill.

I am I right then in assuming the all D-Radio is still streamed form the States?

Adrian Thomas

On Oct 7 2013, Bill Brandom wrote: 

>Hello Aswath,
>
>If DisklavierRadio is showing up in Japanese and all else is in English, it
>indicates that the DKC-850 was made for the Japanese market, not for export.
>
>This setting usually can be corrected by going into Test Mode. If you have
>a very old control unit this solution will not work.
>
>You must be very, very careful when in this mode because you could make
>setting changes that will cause you major problems. So follow this
>procedure exactly:
>
>- Turn off the control unit
>- Power up while holding the STOP and RECORD button
>- This should put you in TEST MODE
>- Press the DOWN arrow
>- Press the RIGHT arrow
>- Press PLAY button. This will display Test & Loader version. The version
>will need to be 2.00 or higher for this to work...
>- Screen should look something like 800| JPN | REC | GP | DB51
>- Press SELECT button, this should change JPN to ENG
>- Turn control unit off
>- Turn control unit back on. Problem should be corrected.
>
>I hope this helps!
>
>Bill Brandom
>
>
>On Mon, Oct 7, 2013 at 7:04 AM, wrote:
>
>> **
>>
>>
>> I don't know your location, but maybe Yamaha have added a D-Radio server
>> in Japan and your location determines which server you connect to? Bill
>> Brandom might be able to throw some light on this.
>>
>>
>> ---In disklavier@yahoogroups.com, wrote:
>>
>>
>> Greetings everyone!!
>>
>> Whenever I connect my Disklavier E3 to D-Radio, the screen on the
>> controller changes to Japanese.
>>
>> Even if I try to change the language using the remote controller, it
>> doesnt.
>>
>> Is there any thing that I have missed?
>>
>> Please advice
>>
>> Aswath
>>
>> 
>>
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.