Message
Re: [disklavier] RE: D-Radio is shown in Japanese only
2013-10-10 by Adrian Thomas
Adrian Thomas
On Oct 7 2013, Bill Brandom wrote:
>Hi Adrian,
>
>My understanding is the "English" version is from the U.S. and the "Japanese" version is streamed from Japan.
>
>The two locations are not playing exactly the same content.
>
>Bill
>
>Sent from my iPhone.
>
>On Oct 7, 2013, at 7:58 AM, Adrian Thomas wrote:
>
>Thanks for your input Bill.
>
>I am I right then in assuming the all D-Radio is still streamed form the States?
>
>Adrian Thomas
>
>On Oct 7 2013, Bill Brandom wrote:
>
>>Hello Aswath,
>>
>>If DisklavierRadio is showing up in Japanese and all else is in English, it
>>indicates that the DKC-850 was made for the Japanese market, not for export.
>>
>>This setting usually can be corrected by going into Test Mode. If you have
>>a very old control unit this solution will not work.
>>
>>You must be very, very careful when in this mode because you could make
>>setting changes that will cause you major problems. So follow this
>>procedure exactly:
>>
>>- Turn off the control unit
>>- Power up while holding the STOP and RECORD button
>>- This should put you in TEST MODE
>>- Press the DOWN arrow
>>- Press the RIGHT arrow
>>- Press PLAY button. This will display Test & Loader version. The version
>>will need to be 2.00 or higher for this to work...
>>- Screen should look something like 800| JPN | REC | GP | DB51
>>- Press SELECT button, this should change JPN to ENG
>>- Turn control unit off
>>- Turn control unit back on. Problem should be corrected.
>>
>>I hope this helps!
>>
>>Bill Brandom
>>
>>
>>On Mon, Oct 7, 2013 at 7:04 AM, wrote:
>>
>>> **
>>>
>>>
>>> I don't know your location, but maybe Yamaha have added a D-Radio server
>>> in Japan and your location determines which server you connect to? Bill
>>> Brandom might be able to throw some light on this.
>>>
>>>
>>> ---In disklavier@yahoogroups.com, wrote:
>>>
>>>
>>> Greetings everyone!!
>>>
>>> Whenever I connect my Disklavier E3 to D-Radio, the screen on the
>>> controller changes to Japanese.
>>>
>>> Even if I try to change the language using the remote controller, it
>>> doesnt.
>>>
>>> Is there any thing that I have missed?
>>>
>>> Please advice
>>>
>>> Aswath
>>>
>>>
>>>
>>
>