Disklavier

Hi Kevin,

Sorry for the mis-information. Highlight the OMNI IN VOLUME line, you have an outer ring that goes around the SELECT button on the PRC-100. Use the left and right sides of the outer ring to change the value of the Volume setting from 0 to around 70 and see how it sounds - raise or lower the value, as needed.

Bill

On Apr 12, 2014, at 4:19 PM, Kevin Weng <kevinweng99@...> wrote:

Sorry Bill I still can't find the yes/no key. Here is picture of my prc-100.

Kevin

On Apr 12, 2014 1:25 PM, "Bill Current Gmail" <bill.brandom03@...> wrote:

Highlight the line then use your YES/NO buttons.

Bill

On Apr 12, 2014, at 1:10 PM, Kevin Weng <kevinweng99@...> wrote:

Yes I get there and indeed the audio in is set to 0.
However I don't see how I can change it. I can get into the field but then?

Kevin

On Apr 12, 2014 10:59 AM, "Bill Current Gmail" <bill.brandom03@...> wrote:

Go into Setup, then Audio I/O, (last page of User functions on the PRC-100.)

Bill

On Apr 12, 2014, at 10:27 AM, Kevin Weng <kevinweng99@...> wrote:

Hi Bill,

Where I can set the OMNI IN level? I look at the volume setting, I only see :

Voice

TG

Audio

Mic

Thanks,

Kevin

On Fri, Apr 11, 2014 at 3:48 PM, Bill Brandom <;billbrando@...> wrote:

It sounds like your OMNI IN volume is set to 00. Raise your volume level to 60 or so and see if you can hear what is being sent to the OMNI IN.

Bill

On Apr 11, 2014, at 11:48 AM, Kevin Weng <kevinweng99@...m> wrote:

I am trying to setup the karaoke on the disklavier to have input accompany sound like from a youtube video.

It is working but I have to use the "Remote Live" feature , which requires me to subscribe to the disklavier radio.

I am thinking there has to be an input to take an audio line in without turning to remote live. I try OMNI IN and it does not work. Any idea?

Kevin