Yahoo Groups archive

Disklavier

Index last updated: 2026-04-28 23:20 UTC

Message

Re: [disklavier] Service Manual and Schematics for MarkII DKC100R

2014-12-30 by Brad Harper

Thanks Carol,

Could this have been caused by moving the piano to a new location?  I did 
not have this problem until the piano was moved.  It was in storage for 
about 6 months.

This link does not contain a Service manual though, is there still one 
more manual?

Thanks again… Brad
From:  "Carol Beigel carol@... [disklavier]" 
<disklavier@yahoogroups.com>
Reply-To:  <disklavier@yahoogroups.com>
Date:  Tuesday, December 30, 2014 at 10:46 AM
To:  <disklavier@yahoogroups.com>
Subject:  Re: [disklavier] Service Manual and Schematics for MarkII DKC100R

 
 
 
 
   

This could be a damper pedal solenoid out of adjustment.  When it  heats 
up it shuts down the entire system.  If it was a power supply it probably 
would not start to play at all.  An experienced Disklavier tech is best 
equipped to make this adjustment.  Otherwise you will find it in the 
service manual or the maintenance manual instructions how to do this.


Carol Beigel

On Dec 30, 2014, at 8:15 AM, 'MixMeisterBob' mixmeisterbob@... 
[disklavier] <disklavier@yahoogroups.com> wrote:



http://yamahaden.com/resources-2/item/281-mark-ii-manual
 
From: disklavier@yahoogroups.com [mailto:disklavier@yahoogroups.com] 
Sent: Tuesday, December 30, 2014 2:36 AM
To: disklavier@yahoogroups.com
Subject: [disklavier] Service Manual and Schematics for MarkII DKC100R
 
  
Hi All,
 
I am looking for a Service Manual and Schematics for MarkII DKC100R
 
I am Having a “PWM over” error, shortly after starting playback, so I am 
looking for a Service Manual with Schematics for the Solenoid Power 
supply, and any good advice on tests, and what to look for.
 
That’s a good starter discussion.
 
Thanks for your Help… Brad
Brad Harper
Bharper33@...

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.