Disklavier

Thanks of your offer to relocate Bill. Everything is a little upside down here. Maybe I will try turning the DSR1 over and see what happens..!? ;-)
I will go through all that you have suggested. It might take me a bit so stay tuned.. and thanks again for your help!
Carl from sunny Sydney.
 


     On Sunday, 19 April 2015, 12:23, "Bill Brandom bill.brandom03@... [disklavier]" <disklavier@yahoogroups.com> wrote:
   

     Carl,
I just listened to two the two files. You are located in Australia, right? We don't have these kind of problems in the U.S...:-))
This really is an odd problem. I don't know how one could even make your piano do this.
Lets take a look at your setup. I want to make sure there is no MIDI loop occurring with your setup. 
-What are your MIDI connections: DKC100 MIDI OUT to DSR1 MIDI IN? DSR1 MIDI THRU to COMPUTER MIDI INTERFACE MIDI IN? Do you have any MIDI cable going into the DKC100 MIDI IN? (I need to have a clear understanding of how this all is connected.)
- Disconnect the MIDI cables connecting the DKC100 to the DSR1 and computer. If you record a song internally to the DKC100, only depressing the damper pedal, does it play back with the same problem? - If so, try transposing playback up 1/2 step. Does the "C" problem now become a "C#" problem?
- Are you recording to the DSR1 and then playing back from the DSR1?
We must be getting closer to figuring out the problem, right? 
If all else fails, move to the U.S. and I think this problem will be solved. You will have lots of new problems, but not with your Disklavier.
Bill

On Sat, Apr 18, 2015 at 6:56 PM, carlspost2@....au [disklavier] <disklavier@yahoogroups.com> wrote:

     [Attachment(s) from carlspost2@... [disklavier] included below] Hi Bill,

Here are two midi files. The first is me playing nothing but sustain pedal three times. The second file I put the sustain pedal down and then play E fours times about one  second apart...

Its quite the conundrum... I have been looking for other causes but have come up with nothing.

Maybe my set up will give you a clue..?  I have both a DSR1 and a DKC100R connected . The cable goes from the piano into the DKC100R and then from there to the DSR1 via midi cable then from there to my laptop. Could one be interfering with the other?

Cheers,

Carl