Hi again Bill,
Sorry to bother you again about my pesky pedal recording problem. I thought I would give just one last thing a go before I conceded defeat. I think you alluded to it in you previous email. You suggested that there might be something physically interfering with the action and recording solenoids. I did take a look with a torch etc but didnt see anything.
I haven't yet gone as far as sliding out the action to take a closer look. My question is .. does the DKV action slide out just like a normal action - apart from the two electric cables that need disconnecting? Is there anything else that can be easily damaged.? If its pretty straight forward I will have a look -but if it requires specialist handling I will get in the pros...
Cheers, Carl
On Saturday, 18 April 2015, 23:53, "Bill Brandom bill.brandom03@... [disklavier]" <disklavier@yahoogroups.com> wrote:
Hi Carl,
I just played the file. Help me understand:
- you played middle C twice, with damper pedal down and the E plays between the 2 Cs?
- if you just push the pedal down, without playing a C, will the E play (without you touching any key?)
- what happens when you push the pedal down and only play the E four times, each a couple of seconds apart? Can you send the MIDI files to me?
Bill
iPhone
On Apr 18, 2015, at 6:21 AM, carl schmidt carlspost2@... [disklavier] <disklavier@yahoogroups.com> wrote:
Hi Pianobench,
Yes thats corrects. It seems to generate a sputtering of the notes when I play the sustain pedal. So its generates a series of unwanted notes in the recorded file. I have attached a small example midi file in which I played- middle C / sustain pedal / middle C again. If you can play it you will hear what I mean... Cheers, Carl
On Saturday, 18 April 2015, 23:11, "George Frederick Litterst PianoBench@... [disklavier]" <disklavier@yahoogroups.com> wrote:
Good morning, everyone.
Carl, I don’t understand what you are saying.
Are you saying that when you push the sustain pedal, you generate a note-on message for E above middle C?
Regards,PianoBench
On Apr 18, 2015, at 2:20 AM, carlspost2@... [disklavier] <disklavier@yahoogroups.com> wrote:
I have connected my Disklavier DSR1 to a PC and sequencer software but when ever I record the sustain pedal keeps producing the note (-E just above middle C) on the recorded output . I have gone through all the possible set up issues but have not been able to resolve it. I know it must have something to do with midi channels etc... Does anyone please have a simple solution..?? Cheers,
CarlMessage
Re: [disklavier] Sustain Pedal producing note sounds in sequencer
2015-04-21 by carl schmidt
Attachments
- No local attachments were found for this message.