Yahoo Groups archive

Disklavier

Index last updated: 2026-04-28 23:20 UTC

Message

Re: [disklavier] Sustain Pedal producing note sounds in sequencer

2015-04-23 by Spencer Chase

i'm sure that one is good too. never had anyone contact me about problems who mentioned a yamaha adapter but that is probably a given :)

On 4/23/2015 2:10 PM, Alan Dorschug ISKI1@... [disklavier] wrote:

I have been using the Yamaha UX16 cable for years and have not had any issues.


I have seen them priced from $25 - $75 on Ebay.


-----Original Message-----
From: carl schmidt carlspost2@... [disklavier]
To: disklavier
Sent: Thu, Apr 23, 2015 3:59 pm
Subject: Re: [disklavier] Sustain Pedal producing note sounds in sequencer

The old USB-Midi cable was an el cheapo off ebay. It cost under 10 dollars and didnt even have a brand name. the new replacement cable is a Roland UM-ONE MK2.

It cost 59 dollars but money well spent!

Carl



On Thursday, 23 April 2015, 23:15, "Alan Dorschug ISKI1@... [disklavier]" <disklavier@yahoogroups.com> wrote:


What brand was the old cable and what brand was the replacement?


-----Original Message-----
From: carlspost2@... [disklavier] <disklavier@yahoogroups.com>
To: disklavier <disklavier@yahoogroups.com>
Sent: Thu, Apr 23, 2015 7:37 am
Subject: Re: [disklavier] Sustain Pedal producing note sounds in sequencer

Hi Spencer,

PROBLEM SOLVED!!

Thanks for the help with this but I fixed the problem very easily without the need for complicated adjusting of settings or pulling the piano apart.

All I did was simply replace the USB-Midi cable with a better quality one and the problem was instantly resolved! Goes to show that cheap is cheap for a reason!

Regards,
Carl




-- 

Best regards, Spencer Chase
67550-Bell Springs Rd.
Garberville, CA 95542 Postal service only.
Laytonville, CA 95454 UPS only.
Spencer@spencerserolls.com
http://www.spencerserolls.com
(425) 791-0309

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.