Disklavier

Good evening, everyone.

Michael, according to the DKC-850 documentation, the DKC-850 can be installed as a complete replacement for the DKC-55. I was presuming  from your email that the DKC-55 was still connected to the piano—which would mean that the DKC-850 is connected by MIDI cables.

Regards,
PianoBench

> On Mar 29, 2016, at 2:51 PM, Michael Jurewicz michaelf.jur@... [disklavier] <disklavier@yahoogroups.com> wrote:
> 
> 
> I'm not sure about that one as the customer himself both installed and calibrated the dkc850 himself. I can only ask him through email but I will find out. Isn't his unit a replacement though? Should the dkc-55 setting not matter ? 
> 
> Sent from my iPhone
> 
> On Mar 29, 2016, at 1:13 PM, George Frederick Litterst PianoBench@... <mailto:PianoBench@...> [disklavier] <disklavier@yahoogroups.com <mailto:disklavier@yahoogroups.com>> wrote:
> 
>>  
>> Good afternoon, everyone.
>> 
>> 
>> Michael, am I correct in assuming that you have connected the DKC-850 to the DKC-55 using MIDI cables? If so, is the MIDI In Delay on the DKC-55 set On or Off? I suspect that it is On when it should be Off.
>> 
>> Regards,
>> PianoBench
>> 
>> 
>>> On Mar 29, 2016, at 12:42 PM, Michael Jurewicz michaelf.jur@... <mailto:michaelf.jur@...> [disklavier] <disklavier@yahoogroups.com <mailto:disklavier@yahoogroups.com>> wrote:
>>> 
>>> So I got this message from a customer recently, and I honestly do not have much experience messing around with the smart pianosoft function of the disklavier. Anyone have any ideas? 
>>> My first thought was to go and change a setting in the "audio I/O" settings from the setup menu. Otherwise, I'm not too sure. ...
>>> 
>>> After we did the calibration using the DKC-55 box we have been testing the
>>> Smart Pianosoft disk performance with the piano playing its accompanying
>>> audio cd. It seems that the piano is slightly ahead of the audio CD after
>>> the calibration. Could this have something to do with us not being able to
>>> calibrate it with the DKC-850 box and having to use the old box? 
>>> 
>>> Thanks!
>>> Michael
>>> 
>> 
>> 
> 
>