Yahoo Groups archive

Disklavier

Index last updated: 2026-04-28 23:20 UTC

Message

Re[2]: [disklavier] Re: The key drive temperature is very high

2016-11-17 by Spencer Chase

i doubt that playing a single loud song can do much damage. if the file might be the culprit and you want to test with it, you can use my midimod2 program to lower the velocity of all the notes. it will not change any other data so the file will see be a useful test. you can get the program from the download page of my web site at spencerserolls.com
Best regards, Spencer Chase
67550-Bell Springs Rd.
Garberville, CA 95542 Postal service only.
Laytonville, CA 95454 UPS only.
21220 92nd Place W., Edmonds, WA 98020
Spencer@...
Spencer@...
Spencer@...
http://www.spencerserolls.com
http://www.poodlex.com
(425) 791-0309
(707) 223-8212



------ Original Message ------
From: "Dmitry dmitryos@... [disklavier]" <disklavier@yahoogroups.com>
To: disklavier@yahoogroups.com
Sent: 11/17/2016 8:20:22 AM
Subject: Re: [disklavier] Re: The key drive temperature is very high

Thank you for the diagram - I will definitely check that (a bit away from home this week).
Just the issue happened first time recently (twice) but now I cannot reproduce it even I used midi files to play for about 30 min.
It might happen that the issue was caused by a file that was not "designed" for disklavier - looks like all the notes had maximum volume. But not sure - I didn't want to run that file again as it was that loud and don't want to stress the piano again.
I might contact Yamaha but need to be sure what to tell them if it will be a consistent issue I think as a general maintenance was done recently (within 4 months).

On 17 November 2016 at 01:32, tnmshd@... [disklavier] <disklavier@yahoogroups.com> wrote:

I guess that your Disklavier system needs fine adjustment.

Most of the reason why the piano performance stops is insufficient adjustment of the pedal
pedal regulate and measurement.(The most important point)
key regulate and measurement.
Regular regulation and tuning.

How about asking Yamaha?


Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.