Disklavier

Good evening, everyone.

James, I suggest that you call Yamaha Piano Service: (800) 854-1569

Regards,
PianoBench

> On Feb 19, 2017, at 5:23 PM, James McGowan hanfordjim@... [disklavier] <disklavier@yahoogroups.com> wrote:
> 
> 
> I tried running the cable directly from the dkc-850 to the router and tried running the cable directly from dkc-850 to the modem and got the same bad result.  Did not use a wireless connection.       Tx.
> 
> Sent from my iPad
> 
> On Feb 19, 2017, at 4:26 PM, 'George F. Litterst' PianoBench@... <mailto:PianoBench@...> [disklavier] <disklavier@yahoogroups.com <mailto:disklavier@yahoogroups.com>> wrote:
> 
>>  
>> Good afternoon, everyone.
>> 
>> 
>> James, how is your DKC-850 connect to the Internet? Is it connected by ethernet cable to the router and then by ethernet to the modem, or is there wi-fi somewhere in the data chain?
>> 
>> Regards,
>> PianoBench
>> 
>> 
>>> On Feb 18, 2017, at 10:10 PM, James McGowan hanfordjim@... <mailto:hanfordjim@...> [disklavier] <disklavier@yahoogroups.com <mailto:disklavier@yahoogroups.com>> wrote:
>>> 
>>> 
>>> Dear group:
>>> I have a dkc-850 which plays midi files from USB drives flawlessly, but disklavier radio causes piano to stutter and stammer, do a flurry of notes at hyper speed, and then stops.   The store where I bought the piano no longer services them, and I am sad.  Please help!  
>>> Sent from my iPad
>>> 
>>> On Feb 18, 2017, at 6:32 PM, 'Spencer Chase' lists@... <mailto:lists@...> [disklavier] <disklavier@yahoogroups.com <mailto:disklavier@yahoogroups.com>> wrote:
>>> 
>>>>  
>>>> 
>>>> i have a free program called midimod2 on my web site on the download page. it will do some of what you need to make files work on the DKV but there are all sorts of things that might be wrong with the file and my program only fixes a few things. the main use of the program is to modify loudness profiles but there is an option to put piano parts on channels 1 and 2 and pedal on channel 3.  depending on the vintage of DKV you have, you may need to convert to type 0 MIDI. i have another program on the same page that does that. both programs work in batch mode so you can process a lot of files with little effort.
>>>> http://www.spencerserolls.com <http://www.spencerserolls.com/>
>>>> http://spencerserolls.com/Files4Download.html <http://spencerserolls.com/Files4Download.html>
>>>>  
>>>>  
>>>> Best regards, Spencer Chase
>>>> 67550-Bell Springs Rd.
>>>> Garberville, CA 95542 Postal service only.
>>>> Laytonville, CA 95454 UPS only.
>>>> 21220 92nd Place W., Edmonds, WA 98020
>>>> Spencer@... <mailto:Spencer@...>
>>>> Spencer@... <mailto:Spencer@...>
>>>> Spencer@... <mailto:Spencer@...>
>>>> http://www.spencerserolls.com <http://www.spencerserolls.com/>
>>>> http://www.poodlex.com <http://www.poodlex.com/>
>>>> (425) 791-0309
>>>> (707) 223-8212
>>>> 
>>>> 
>>>> 
>>>> ------ Original Message ------
>>>> From: "squiredeli@... <mailto:squiredeli@...> [disklavier]" <disklavier@yahoogroups.com <mailto:disklavier@yahoogroups.com>>
>>>> To: disklavier@yahoogroups.com <mailto:disklavier@yahoogroups.com>
>>>> Sent: 2/18/2017 3:01:06 PM
>>>> Subject: Re: [disklavier] Re: MIDI files
>>>> 
>>>>>  
>>>>> 
>>>>> Yes, I downloaded a midi file from Yamaha and it worked fine. Must've been the files themselves, unless I did something wrong? Basically I was on midiworld.com <http://midiworld.com/> clicked to download some files to the desktop and then transferred to a thumb drive. Is there some software I need to run them through first?
>>>>> 
>>>>> Sent from my iPhone
>>>>> 
>>>>> On Feb 18, 2017, at 2:19 PM, joegugs3@... <mailto:joegugs3@...> [disklavier] <disklavier@yahoogroups.com <mailto:disklavier@yahoogroups.com>> wrote:
>>>>> 
>>>>>>  
>>>>>> Did you check that the track with the data is set to channel 1 or channel 4? I use Anvil Studio to edit the midi files and set the channel for playback on my disklavier. Hope this helps.
>>>>>> 
>> 
>> 
> 
> 
> 
> 
>