Thank you in advance for the help.
I am trying to help friend who has the following Disklavier configuration
DKC-100r (display is not working, the unit is)
MU-50 with powered speakers
Pass through midi cable
Windows 10 computer
Midisport Uno 1x1 midi cables
Van Basco & Yamplayer
The Setup:
The computer is connected to the MU-50’s midi in and mid out with the Midisport Uno.
The MU-50 is connected to the DKC 100R with the pass-through cable.
What works:
The piano plays “piano only” (Channels 1 & 2) fine
The Issue:
When the system is tasked to play Piano and XG(plus parts) (1- 16)
The piano plays the piano part
The MU-50 plays both the piano and the “plus parts” a half second later.
My question:
HOW do I stop the MU 50 from duplicating the piano part on the speakers?
How to I match the timing so that the piano and the plus parts are synced?
One other issue is that VanBasco allows you to control the volume, tempo and modulation.
The VanBasco volume control does not work on the actual piano. The other functions tempo and modulation work on the piano.
VanBasco controls work fine with the MU-50 output.
My Thinking:
I believe that this is a matter of setup but I have not been able to find the “how to” in the manual for the MU-50 and DKC 100r. Additionally if the settings have to be changed on the DKC-100r I will not be able to see what I am doing as the display has failed.
Help need:
Does anyone know the steps that I should take to correct these challenges?
Any help will be appreciated.
Thanks
DanO