Yahoo Groups archive

Disklavier

Index last updated: 2026-04-28 23:20 UTC

Message

Re: [disklavier] Re: How to convert Midi to ESEQ?

2018-11-12 by Tim

Thanks all!

> On Nov 12, 2018, at 11:18 AM, JEFFREY SYKES jeff0ldbean@btinternet.com [disklavier] <disklavier@yahoogroups.com> wrote:
> 
> Hi Tim,
> Try this, as it is what i am using right now on my Win 10 PC.
> Buy a USB to MIDI interface off Ebay, About £3:59.
> They are all the same.
> Download Yamplayer from That Carolrpt link.
> The Download Link Is near the Top of the Web Page.
> When you have got your interface cable.
> Attach it to your PC/Laptop.
> Not sure if it will register in Device Manager without being plugged up to the MIDI Ports.
> But you will most likely have to search the Net for a suitable Driver.
> If it shows a Yellow triangle Issue In Device Manager.
> Hope you Know how to update. 
> The driver correctly.
> You will know if you have.
> Because when you have installed Yamplayer.
> You will see the Viewcon in the drop down, of Play Thru.
> If all goes well then you can Play any Midi file straight from you PC/Laptop to the Diskclavier.
> Having the Midi ports at the front of the Piano is much easier for connecting to.
> The Model I had, had them on the back.
> It had almost the same Controller, with the Orange display as you describe.
> I now use this setup on my Kawai RX7 which as a Piano Disc system, but stills plays Midi/E-Seq files OK.
> I cannot remember How you select the Midi Ports on the Disklavier.
> Hope This Helps.
> 
> jeffoldbean.
> 
> On Monday, 12 November 2018, 05:20:45 GMT, wam@... [disklavier] <disklavier@yahoogroups.com> wrote:
> 
> 
> 
> 
> Ralph's advice  is correct – Try utilities in these old resource pages which are still active:
> 
> http://www.carolrpt.com/musicsoftware.htm
> 
> 
> 
> http://www..midiplayertools.com/musicsoftware.htm
> 
> 
> 
> http://www.spencerserolls.com/Files4Download.html
> 
> 
> 
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.