Disklavier

George,

Thanks for correcting the fact that I had not noticed that Ting was 
using a Mac.  My apologies to Ting for misleading him with the driver 
information which is, indeed intended only for Windows machines.

Tom

PianoBench@... wrote:

>Good afternoon, everyone.
>
>In a message dated 6/9/02 2:49:54 PM, Ting writes:
>
><< I am trying to use Finale on my PowerPC 8500 to play songs on my
>MarkII XG disklavier. I am connecting through modem port to "To Host"
>with 8 pin printer cable.
>
>I am really lost. Can anyone give me any hint and suggestions? >>
>
>Tom gave you good advice regarding the installation of an important Yamaha 
>MIDI driver. However, that advice only applies to Windows computers. Since 
>you have a Macintosh, you do not need the Yamaha driver (and could not 
>install it if you tried). Also, since you have an older Mac with serial ports 
>and a program that has its own, built-in serial port MIDI driver, you do not 
>need to install any other Macintosh MIDI driver software.
>
>Simply attach your serial cable to both your Mac's modem port and to your 
>Disklavier's To Host port. Make sure that the Disklaveir's To Host switch 
>near the serial port is set to "Mac."
>
>In the Finale MIDI Setup dialog box, choose the Modem port for MIDI output 
>(and input if you wish to enter notes from your Diskklavier keyboard). At 
>this point, everything should work just fine IF:
>
>(1) Your Macintosh modem port is not tied up by some other program. For 
>example, AppleTalk can be set to use the modem port. If so, this will prevent 
>the port from being used by Finale for MIDI. Also, the HotSync software that 
>comes with either the Palm Desktop or the Claris Organizer program can 
>monopolize that port unless you turn off the HotSync feature.
>
>(2) Each staff in Finale is assigned to the appropriate MIDI channel. Check 
>the MIDI Receive channel on you Disklavier. That setting determines which 
>channel data is played by the Disklavier. All other channels are played by 
>the tone generator (which means that you must have speakers attached to the 
>Disklavier and turned on in order to hear those other tracks).
>
>Regards,
>PianoBench
>
>To Post a message to the group, send it to:   disklavier@...
>
>To Post a private message to Todd Muncy, the group's founder and moderator, send it to:
>disklavier-owner@...
>
>To reach our group's web site go to:
>http://Yahoogroups.com/group/disklavier
>
>Todd's family web site was completely rewritten in June 2001 and contains some fun disklavier content and links to midi sites among other things, The url is:
>http://MuncyFamily.com
>
>THINKING OF LEAVING THE GROUP?
>If you are thinking of unsubcribing because you are getting too much mail, go the the web site and change your email delivery option instead.  That will fix the problem, while maintaining your access to the group.  If you insist on leaving us completely send a blank email to:
>disklavier-unsubscribe@...
>
>Know someone who wants to join?  Have them send a blank email to:
>disklavier-subscribe@... or give them this link:
>http://Yahoogroups.com/group/disklavier/join
> 
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 
>
>
>