Disklavier

The DKC500RX is the control box for MarkIIXG Disklaviers - only! Neither the 
MX100A/B or the MarkII systems have flash rom upgrades or tone generators.  
They can only be upgraded by using the DSR1 box.

Carol Beigel
crbrpt@...





>From: "fakepopster <raydene@...>" <raydene@...>
>Reply-To: disklavier@yahoogroups.com
>To: disklavier@yahoogroups.com
>Subject: [disklavier] Re: MX100a add on
>Date: Fri, 31 Jan 2003 06:27:31 -0000
>
>Dang!  Thanks.  The DKC500RX would work on a mx100II or any other
>mark II, just not the mx100a, yes?  The DSR1 has/is a tone
>generator?
>
>--- In disklavier@yahoogroups.com, PianoBench@a... wrote:
> > Good evening, everyone.
> >
> > In a message dated 1/23/03 7:45:05 PM, raydene@n... writes:
> >
> > << Hmm...connecting by a midi cable.  Maybe I could just connect
>the
> > DKC500RX box to the mx100a in this manner?  The DKC500RX box has a
> > midi out port.  It seems logical but probably isn't that easy, eh?
> > Any thoughts?  Thanks again!   >>
> >
> > Sorry, but that will not work. The DKC500RX needs to connect to the
> > Disklavier with a special cable that powers the control unit and
>handles the
> > I/O (MIDI, communication with the disk drive, calibration tests, et
>cetera).
> > The MIDI ports are for communication with the outside world.
> >
> > The DSR1 has its own power supply and does MIDI I/O with the
>control unit of
> > the piano using one set of MIDI ports and does MIDI I/O with the
>rest of the
> > world using a second set of MIDI ports. The DSR1 does not handle
>calibration
> > issues. That will still be handled by the original control unit of
>the piano.
> >
> > Regards,
> > PianoBench
>


_________________________________________________________________
Tired of spam? Get advanced junk mail protection with MSN 8. 
http://join.msn.com/?page=features/junkmail