Disklavier

Here are a few things to try:

1) Check the volume control button on the DCD1.  The piano won't play if 
this setting is too low.

2) On the back of the DCD1, check the piano type switch.  It should be set 
to DKV.

3) Are you playing a Yamaha PianoSoft disk, or a disk with MIDI files?  If 
it is a MIDI file, the piano keys only play whatever data is on Channel 1 or 
2.  Set Piano Part L=1, R=prg using the Function key.

4) When the song is playing, are either the L or R buttons blinking?  Make 
sure neither button is pushed thereby cancelling the piano keys.

5) If a PianoSoft disk won't play the keys, then just do a Reset.


Carol Beigel
crbrpt@...





>From: "Bill" <tbill84701@...>
>Reply-To: disklavier@yahoogroups.com
>To: disklavier@yahoogroups.com
>Subject: [disklavier] Piano wont play from diskette after installing EMK1.
>Date: Sun, 30 Mar 2003 05:40:11 -0000
>
>This is my first post so please excuse any clumsiness stating
>funcitons of the piano.
>
>I have a DC3Pro with a DKC500RW control unit.  I also have the
>DCD1.
>
>The technician came and installed the EMK1 a couple days ago.  Today
>I tried to play from a diskette and the piano does not play.  The
>accompanyment plays fine but the keys do not move.
>
>The cables are all correctly connected.  The problem is in the
>configuration of the new DKC500RW board to recognize the piano.
>
>I have searched the Yamaha site but can not find any insturctions to
>do the configuration.
>
>I have out of town guests comming and want to play and record on the
>piano tomorrow.
>
>Help ASAP!
>
>Bill Tice
>Vallejo, CA
>
>


_________________________________________________________________
Tired of spam? Get advanced junk mail protection with MSN 8. 
http://join.msn.com/?page=features/junkmail