Disklavier

Use the regular Volume control on the DKV control box for the piano.  Set it 
all the way low and it will stay there.  You can adjust the volume coming 
through the speakers (even though you have set the TG balance) by crawling 
under the piano and adjusting the volume on the amplifier.

Also, your technician can set the ppp value of each note on the DKV to play 
very soft.  Perhaps this has not been done yet.

Carol Beigel
crbrpt@...





>From: "Jimmy" <JimmyM@...>
>Reply-To: disklavier@yahoogroups.com
>To: disklavier@yahoogroups.com
>Subject: [disklavier] Trying to lower the piano level with an SPS disk and 
>CD.
>Date: Wed, 18 Jun 2003 17:02:39 -0000
>
>I am trying to foind out how to reduce the level (volume) on the mark
>III when playing SPS disk qith commercial CD.
>I have notice that I can reduce the level of the piano when playing
>by selected the arrow and get to the vol function (set at 100) I am
>able to reduce the piano player to sound softer by lowering the
>volume to a lower level, however this is only good for the tune being
>played and it goes back to normal soon after when the next song start.
>
>Is there  afunction to get the piano to play softer and keep the
>level down for the whole album.  I am already playing the piano with
>the level =E0t -10db on the regular master volume control.. The TG
>master for the CD is already set to my regular value of 85, which is
>quiete acceptable in my house, but to get the piano and the CD sound
>nice together I need to increase the volume on the left control to
>high to compensate for the higher piano level, however as mentioned
>before if I lower the piano while it is playing with the arrow
>accessingthe first line of the screen I can lower this to a lower
>value but it soen't stay after the song is over it comes back to
>level=3D100.
>
>Anyone can help, if I was not to confusing.
>
>Jimmy
>
>
>

_________________________________________________________________
MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*.  
http://join.msn.com/?page=features/virus