Disklavier

Yes it does!

Now, keep in mind that Mitsubishi decided to shrink the size of the 
26 pin edge connector for the ribbon cable the last few years. The 
good news is it's still pin compatable. I just spliced the ribbon 
cable apart and soldered it to the new smaller ribbon cable.

Major pain in the butt, but I now have a HD 100xg unit.

The other interesting thing is the unit uses a DX50 daughter card - 
the same card I used to have on my old Creative Labs soundblaster 
card back many computers ago... Still sounds good after all these 
years.

--- In disklavier@yahoogroups.com, "Ralph Specht" <thespechts@c...> 
wrote:
> Does it now read HD disks also?
>   ----- Original Message ----- 
>   From: a_zoghlin 
>   To: disklavier@yahoogroups.com 
>   Sent: Friday, September 05, 2003 3:11 PM
>   Subject: [disklavier] Found floppy replacement....
> 
> 
>   FYI,
> 
>   My neighbor's children decided to feed the 3.5" drive in my 
>   disklavier... needless to say, it died.
> 
>   I took the controller apart (100r), and found a Mitusbishi MF355H-
>   262MG. After doing a bit of hunting, I found it was pin 
compatable 
>   with this drive
> 
>   http://store.yahoo.com/alan-fm/mf355h-348mn.html
> 
>   Sure enough, it worked like a charm.
> 
> 
>         Yahoo! Groups Sponsor 
>               ADVERTISEMENT
>              
>        
>        
> 
>   To Post a message to the group, send it to:   disklavier@Y...
> 
>   To Post a private message to Todd Muncy, the group's founder and 
moderator, send it to:
>   disklavier-owner@Y...
> 
>   To reach our group's web site go to:
>   http://Yahoogroups.com/group/disklavier
> 
>   Todd's family web site was completely updated 01/15/03.  It 
contains some fun disklavier content and links to midi sites among 
many other things, The url is:
>   http://MuncyFamily.com 
> 
>   THINKING OF LEAVING THE GROUP?
>   If you are thinking of unsubcribing because you are getting too 
much mail, go the the web site and change your email delivery option 
instead.  That will fix the problem, while maintaining your access to 
the group.  If you insist on leaving us completely send a blank email 
to:
>   disklavier-unsubscribe@y... 
> 
>   Know someone who wants to join?  Have them send a blank email to:
>   disklavier-subscribe@e... or give them this link:
>   http://Yahoogroups.com/group/disklavier/join 
> 
> 
>   Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
Service.