Disklavier

Hey Gary,
Had any luck with this yet? I've got the same problem. Carol sent me an 
e-mail response and I have forwarded it to Bill Brandom at Yamaha. I 
also have a problem with an electronic 'tone' that plays in sync with 
the key movements. It is a high pitched electronic feedback sound that 
is quite annoying! Anyone else have this problem?
Let me know how you come out on this.
Sincerely,
Gene
On Tuesday, December 2, 2003, at 12:52  PM, Gary Connoley wrote:

> Hello All,
>
> I have today taken receipt of a DCD1. I installed it initially to hear 
> the
> smart plus audio in action. It is really impressive the demo disk that 
> cam
> with the DCD1 is brilliant.
>
> On to phase 2 - the smart piano disk update.
> I followed the procedure on Carol's web site to the letter, updating 
> both my
> DKC500RW controller and the DCD1's firmware. I switched the system back 
> on,
> popped in the piansoft plus audio disk but all I can hear is the piano 
> not
> the audio. On investigation I found that there was audio but it was so 
> quiet
> it was barely audible. I messed around with ALL of the volume controls:
> piano, controller and DCD1 but no change.
>
> I found that the only way to get the pianosoft plus audio CD to work at 
> the
> proper volume level was is remove the second MIDI cable from the setup 
> and
> power everything off and on.
> It seems that the controller is somehow affecting the output of the 
> DCD1.
>
> Am I missing something? Should I keep both the MIDI cables in now I have
> completed the upgrades?
>
> Regards
> Gary
>
>
>
> To Post a message to the group, send it to:   disklavier@...
>
> To Post a private message to Todd Muncy, the group's founder and 
> moderator, send it to:
> disklavier-owner@...
>
> To reach our group's web site go to:
> http://Yahoogroups.com/group/disklavier
>
> Todd's family web site was completely updated 01/15/03.  It contains 
> some fun disklavier content and links to midi sites among many other 
> things, The url is:
> http://MuncyFamily.com
>
> THINKING OF LEAVING THE GROUP?
> If you are thinking of unsubcribing because you are getting too much 
> mail, go the the web site and change your email delivery option 
> instead.  That will fix the problem, while maintaining your access to 
> the group.  If you insist on leaving us completely send a blank email 
> to:
> disklavier-unsubscribe@...
>
> Know someone who wants to join?  Have them send a blank email to:
> disklavier-subscribe@... or give them this link:
> http://Yahoogroups.com/group/disklavier/join
>
>
> Your use of Yahoo! Groups is subject to 
> http://docs.yahoo.com/info/terms/
>
>