Message
Re: [disklavier] Re: Piano Smart help
2005-05-05 by PianoBench@aol.com
In order to track down the issue, it would be helpful to know:
(1) whether you have put a commercial audio CD into the DCD1
(2) whether you have put a companion floppy disk (which was published specifically to coordinate with this particular audio CD) into the DSR1.
In other words, for Smart PianoSoft to work, you must have both a CD and a floppy that are intended to work together.
Regards,
PianoBench
In a message dated 5/5/05 7:11:49 AM, stone_fl@... writes:
Yes I do have two MIDI cables and the unit already had PS on it.In
the manual with the DCD1 it says the disc will display "SPS Type
Disk" and then will show "PS@GM". My disc just shows SMF disc. It
also does not show "Registering" It seems like the floppy isn't
being recognized as a Smart disc. Thanks--- In
disklavier@yahoogroups.com, "Carol Beigel" wrote:
> Try the instructions on my website at www.carolrpt.com.
> Were there not 2 disks that came with your DCD1+PS?
> You need to update the software on the DSR-1 as well as
> install some software on the DCD1 (but the +PS may mean
> it came to you already updated). Are you using 2 MIDI
> cables? The DCD1 talks to the the DSR-1 via MIDI cable
> in and out.
>
> Carol
>
> ----- Original Message -----
> From: "stone_fl"
> To:
> Sent: Wednesday, May 04, 2005 10:30 PM
> Subject: [disklavier] Piano Smart help
>
>
> > I upgraded my MarkII with a DSR1 and DCD1PS. I
> updated the DSR1 with
> > the update disc included with the DCD1. I purchased
> my first Smart disc
> > and when I put it in the DSR1 it does not read it as
> a Smart disc as
> > detailed in the DCD1 manual. Thus it does not
>; synchronize with the CD.
> > Any thoughts? Thank you.