Disklavier

Good afternoon, everyone.

Gary,

XP files will play in any Disklavier (when received as external MIDI  
data) and from floppy in a Mark II or later model.

The XP format contains much higher resolution information (contained  
in a bundle of key aftertouch and other controller messages). The non- 
Pro Disklaviers ignore this additional information. Unless you have a  
Pro, you might as well avoid the XP files because they are much  
larger--so much so that you may not be able to save an hour-long  
program on a high density disk.

I have not compared the E-SEQ files with the Enhanced Standard MIDI  
files. I was the person who prepared these, and I used the  
Disklavier's own conversion feature for creating the E-SEQ files. I  
am presuming that all of the data was kept. However, I do know that  
incremental pedal data is stored in a different way in an E-SEQ file.  
On/off pedal data is stored on the track assigned to channel 1 (where  
the notes are stored) and that incremental pedal data are stored on  
the track assigned to channel 3. In the SMF, all of the pedal data  
resides in the same track as the note data.

Regards,
PianoBench


On Jul 18, 2005, at 12:53 PM, Garry Neil wrote:

> Good information.  Does XP work with Mark IV?  What
> difference would one notice between .fil ESEQ and .mid
> MIDI files on a Mark IV?
>
> --- "George F. Litterst" <PianoBench@...> wrote:
>
>
>> Good afternoon, everyone.
>>
>> On Jul 15, 2005, at 2:39 PM, Steinbrink@...
>> wrote:
>>
>>
>>> Of a half dozen disks I downloaded from the
>>>
>> Piano-e-competition,
>>
>>> only one of them worked when I put it is the
>>>
>> Disklavier drive.  I
>>
>>> now realize that I probably needed to un-Zip the
>>>
>> files first, but
>>
>>> when I do un-Zip them, I get a message that the
>>>
>> disk does not have
>>
>>> enough room.   Do I need to save the unzipped
>>>
>> files to the PC and
>>
>>> then copy them one-by-one to individual disks? The
>>>
>> formatting on
>>
>>> the Yamaha downloads is not recognized by my PC.
>>>
>> What is going on?
>>
>> Have you achieved success with this?
>>
>> The procedure is:
>>
>> (1) Download the .zip archives.
>>
>> (2) Copy the files out of the archives to a floppy
>> disk.
>>
>> The P-e-C offers the files in 3 formats:
>>
>> E-SEQ
>> --for older Disklaviers (i.e. pre-Mark IIXG)
>>
>> Enhanced Standard MIDI Files
>> --for Mark IIXG and later Disklaviers
>>
>> --XP
>> --for all models of Disklavier Pro
>>
>> Since you have a Mark III, I suggest using the
>> Enhanced Standard MIDI
>> files. If memory serves me correctly, the contensts
>> of each .zip
>> archive of the Enhanced files should fit onto a high
>> density disk.
>> Copy everything, including any directory files.
>>
>> Regards,
>> PianoBench
>>
>>
>>
>
>
>
>
> ____________________________________________________
> Start your day with Yahoo! - make it your home page
> http://www.yahoo.com/r/hs
>
>
>
> To Post a message to the group, send it to:    
> disklavier@...
>
> To Post a private message to Todd Muncy, the group's founder and  
> moderator, send it to:
> disklavier-owner@...
>
> To reach our group's web site go to:
> http://Yahoogroups.com/group/disklavier
>
> Todd's family web site was completely updated 012/22/03.  It  
> contains some fun disklavier content and links to midi sites among  
> many other things, The url is:
> http://MuncyFamily.com
>
> THINKING OF LEAVING THE GROUP?
> If you are thinking of unsubcribing because you are getting too  
> much mail, go the the web site and change your email delivery  
> option instead.  That will fix the problem, while maintaining your  
> access to the group.  If you insist on leaving us completely send a  
> blank email to:
> disklavier-unsubscribe@...
>
> Know someone who wants to join?  Have them send a blank email to:
> disklavier-subscribe@... or give them this link:
> http://Yahoogroups.com/group/disklavier/join
>
> Yahoo! Groups Links
>
>
>
>
>
>
>