Disklavier

Thanks,

I'm actually busy reloading the update now - an idea I had while sleeping on the problem. I doubt if the connectors are the issue as nothing here has been touched.

I can't say that it appearred "immediatley" after the update. I checked my stored recordings (as I'd been warned to back these up) and these were OK. It was the next day when I tried downloading some midi files and tried to load them through a USB stick, when that didn't work I tried the CD and FD.

Will let you know if the re-install works.

Regards


----- Original Message ----
From: athomik <mail@...>
To: disklavier@yahoogroups.com
Sent: Wednesday, May 23, 2007 4:49:09 AM
Subject: Re: [disklavier] Updated to V2 and now unable to access FD, CD or USB


If the problem appeared as soon as you did the update, I would try running the update again. I have come across cases where there was a glitch during the procedure which corrupted some (or all) of the update. 
Another case I have come across is where the D-connector on the media unit hade a bent pin and you couldn't access the Floppy Disk or CD. It may be worth checking that the pins are OK on the media centre and the I/O unit end, and ensure that the connectors are fitted and tightened up correctly.  

athomik

On May 23 2007, Cheetham wrote: 

>I followed the instructions to the letter. I can still play off the HD 
>but I cannot access any other media... what now?
>
>I've tried shutting down and starting up again without success.
>
>I will call my dealer tomorrow, but he confesses to not being good on 
>the computeer side, so any ideas would be welcome.
>
>BTW its a Mark IV
>
>
>
>To Post a message to the group, send it to: disklavier@YahooGro ups.com
>
>To Post a private message to Todd Muncy, the group's founder and moderator, send it to:
>disklavier-owner@ Yahoogroups. com
>
>To reach our group's web site go to:
>http://Yahoogroups. com/group/ disklavier
>
>THINKING OF LEAVING THE GROUP?
>If you are thinking of unsubcribing because you are getting too much mail, go the the web site and change your email delivery option instead. That will fix the problem, while maintaining your access to the group. If you insist on leaving us completely send a blank email to:
>disklavier-unsubscr ibe@yahooGroups. com 
>
>Know someone who wants to join? Have them send a blank email to:
>disklavier-subscrib e@eGroups. com or give them this link:
>http://Yahoogroups. com/group/ disklavier/ join 
> 
>Yahoo! Groups Links
>
>
>
> 



       
____________________________________________________________________________________Get the free Yahoo! toolbar and rest assured with the added security of spyware protection.
http://new.toolbar.yahoo.com/toolbar/features/norton/index.php