Yahoo Groups archive

Disklavier

Index last updated: 2026-04-28 23:20 UTC

Message

Re: Updated to V2 and now unable to access FD, CD or USB

2007-05-24 by Cheetham

Great support from Yamaha service on the phone. After reloading V2 the 
FD and CD worked but still could not access the USB.

Service suggested rebooting - which of course solved the problem - 
until I tried the USB Flash drive. I rebooted again and the USB was OK 
with my hard drive, but again did not recognise the falsh drive. When I 
replaced it with the USB Hard Drive it wasn't working again. Service 
ran through several more permutations, rebooting each time and the USB 
was working until I tried the falsh drive, so must be a fault in this 
(although it works fine on my computer). 

Tried 3 more flash drives. 2 worked one didn't (but it didn't lock up 
the port like the first. 

So now all is good - I must just avoid the one flash drive!

Thanks to Athomik1 for his rapid response and suggestion to reload V2


--- In disklavier@yahoogroups.com, "Cheetham" <cheetham@...> wrote:
>
> I followed the instructions to the letter. I can still play off the 
HD 
> but I cannot access any other media... what now?
> 
> I've tried shutting down and starting up again without success.
> 
> I will call my dealer tomorrow, but he confesses to not being good on 
> the computeer side, so any ideas would be welcome.
> 
> BTW its a Mark IV
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.