Yahoo Groups archive

Disklavier

Index last updated: 2026-04-28 23:20 UTC

Message

Re: Internet solution for connecting Disklavier Mark IV

2008-12-15 by donbouc2

I'm having issues trying to connect to the internet, too.  I'm using 
a Belken F507330 wireless ethernet adapter.  My DKV says it's 
connected, but there is no IP address (it is set to get one 
automatically)...help!

--- In disklavier@yahoogroups.com, Alan Chapman <dj_9225@...> wrote:
>
> david
> 
> can you hook a portable computer to your wireless bridge and see if 
the computer connects to the internet?  If it doesn't then you need 
to work on the wireless before worrying about the DKV.  If the 
computer does connect to the internet through the wireless setup you 
have - then you will need to check some things on the DKV.  It is at 
least a starting place.
> 
> Alan
> 
> 
> 
> ________________________________
> From: dcgreen2008 <dcgreen2008@...>
> To: disklavier@yahoogroups.com
> Sent: Wednesday, November 19, 2008 7:43:16 PM
> Subject: [disklavier] Re: Internet solution for connecting 
Disklavier Mark IV
> 
>  
> So I have ordered online the linksys wireless-g bridge WET54g 
version 
> 3. I configured it with me PC when it was connected to the LAN.
> 
> I then plugged it in to the disklavier but I get the error message 
> that it does not see the IP address. Not sure how to link the tho 
to 
> get it to work . Any advice?
> 
> david
> 
> m--- In disklavier@yahoogro ups.com, "dcolema2001" <drcolema@ .> 
> wrote:
> >
> > I have my Mark IV connected wireless via a Linksys wireless 
bridge, 
> > Model WET54G.  It plugs directly into the Mark IV's ethernet port 
to 
> > make it wireless.  The bridge connects (wirelessly) to a Linksys 
> > access point then via CAT5 wire to a NetGear switch.  I have not 
had 
> > any problems with it since I've installed it. 
> > 
> > Don C.
> > 
> > --- In disklavier@yahoogro ups.com, "Mike Moore" <mmoore@> wrote:
> > >
> > > The only surefire way I know is the one I used: I run an 
ethernet 
> > cord
> > > into the MarkIV from the wireless Airport Express module that I 
> > plugged
> > > in nearby.   That's obviously only a quasi-wireless connection. 
> > Others
> > > in this forum may have found some sort of wireless device that 
> > plugs in
> > > directly to the Mark IV's ethernet or other ports.
> > > 
> > > Mike M.
> > > 
> > > ____________ _________ _________ __
> > > 
> > > From: disklavier@yahoogro ups.com 
> > [mailto:disklavier@yahoogro ups.com] On
> > > Behalf Of dcgreenhfx
> > > Sent: Tuesday, October 21, 2008 6:33 PM
> > > To: disklavier@yahoogro ups.com
> > > Subject: [disklavier] Internet solution for connecting 
Disklavier 
> > Mark
> > > IV
> > > 
> > > 
> > > 
> > > Does anyone have surefire way to make a wireless internet 
> > connection 
> > > for my Mark IV?
> > >
> >
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.