Disklavier

Greetings lowdebt4me,

midimod2 will allow you to reduce the velocity of notes on to 1 which
is very soft. velocity 1 is the softest there is in MIDI. the DKV will
probably play all notes at a minimum level. i think this value is
adjustable but if you make it too low notes may fail to play.

Friday, February 13, 2009, 5:58:51 AM, you wrote:
> Thanks again, Spencer_rolls.

> I downloaded the DKVutilities and was able to open Veloset in Vista, 
> which apparantly works with ESEQ files. I say apparantly because, 
> while the program did run, and I was able to adjust the left (volume?)
> and right (velocity?) sliders, my modified .fil files still seemed 
> pretty loud.

> After a number of attempts at gradually reducing the volume of the .fil
> files I obtained from the classical zip file in the files section of 
> this user group, I finally set the volume and velocity levels to their
> minimum values(ie, 1). I'll have to do an A/B comparison of an 
> original, unmodified .fil file to my minimum value version of the file
> to see if I can tell a difference. I think there is a difference, it 
> just isn't as great a difference as I had hoped for.

> I wonder if another program, such as minimmod2 or gnmidi, would allow 
> me to reduce their volumes even further, or are these minimum settings
> the same minimums that would be established using other programs 
> (assuming I converted the .fil files to MIDI files).

> --- In disklavier@yahoogroups.com, Spencer_Lists <lists@...> wrote:
>>
>> Greetings lowdebt4me,
>> 
>> midimod2 does not work with eseq files. you would have to convert. you
>> might need to have a pre vista machine to run dos. someone else can
>> probably advise on his.
>> 
>> Best regards,
>> Spencer_Lists Chase mailto:lists@...
>> 67550 Bell Springs Rd.
>> Garberville, CA 95542 Postal service only.
>> Laytonville, CA 95454 UPS only.
>> Lists@spencerserolls(dot)com
>> http://www(dot)spencerserolls.com 
>> replace (dot) with a .
>> (707) 984-8356
>>

> 

-- 
Best regards,
Spencer_Lists Chase        mailto:lists@...
67550 Bell Springs Rd.
Garberville,  CA 95542    Postal service only.
Laytonville, CA 95454    UPS only.
Lists@spencerserolls(dot)com
http://www(dot)spencerserolls.com 
replace (dot) with a .
(707) 984-8356