To: disklavier@yahoogroups.com
Sent: Friday, February 13, 2009 10:32:30 PM
Subject: Re: [disklavier] Re: Pedal problem on new model
To: disklavier@yahoogro ups.com
Sent: Friday, February 13, 2009 1:55:23 AM
Subject: Re: [disklavier] Re: Pedal problem on new model
Inside the black metal cover over the pedal solenoids (on some models) is a
diagram of how to adjust the pedal solenoid. It is very simple. However,
for what a Mark IV costs, I would have both a piano technician and an
electronic tech present to do the adjustments. I would contact your Yamaha
Dealer for a recommendation.
Carol Beigel
----- Original Message -----
From: <julien.roche@ ymail.com>
To: <disklavier@yahoogro ups.com>
Sent: Thursday, February 12, 2009 12:46 PM
Subject: [disklavier] Re: Pedal problem on new model
>
> Thanks for your quick answer. Do you know when I can find the right
> technical manual to do the adjustment ? Here in
Albania no
> specialist for Yamaha disklavier, but very good electronic
> technicians who can understand and provide the right adjustment...
>
> Julien
>
>
>
>; - In disklavier@yahoogro ups.com, "Carol Beigel"
> wrote:
>>
>> The pedal solenoid needs adjustment. A technician needs to set it
> properly.
>>
>> Carol Beigel
>>
>> ----- Original Message -----
>> From: Julien Roche
>> To: disklavier@yahoogro ups.com
>> Sent: Thursday, February 12, 2009 12:22 PM
>> Subject: [disklavier] (unknown)
>>
>>
>> Hello, I am a new
comer in this place, based presently in
> Albania with a brand new disklavier IV. Congratulation for the
> initiative.
>>
>> I have a small problem I would like to find solution.
>>
>> After playing between 20 to 40 minutes, the right pedal stopped
> working and the PDA indicated it is temperature problem. I switch
> off the piano and then start again and it works ... until the next
> 20/40 minutes when the right pedal stops working again.
>>
>> The room is climatised at 22 degree celcius, humidity is around
> 60% but I use a deshumidifcation equipment as I leave 50 meters from
> Adriatic sea.
>>
>> How can I solve this problem ? I was thinking maybe the
> installation was not correct and the mechanism is "forcing"
> somewhere that creates this abnormal temperature on the solenoid ?
> Or just something to be adjusted
?
>>
>> Thanks for your precious help by experience.
>>
>> Julien
>>
>>
>>
>>
>>
>> Internal Virus Database is out of date.
>> Checked by AVG - http://www.avg. com
>> Version: 8.0.138 / Virus Database: 270.10.19/1938 - Release Date:
> 2/6/2009 5:28 PM
>>
>
>
>
>
> ------------ --------- --------- ------
>
> To Post a message to the group, send it to: disklavier@YahooGro ups.com
>
> To Post a private message to Todd Muncy, the group's founder and
> moderator, send it to:
> disklavier-owner@ Yahoogroups. com
>
> To reach our group's web site go to:
> http://Yahoogroups. com/group/ disklavier
>
> THINKING OF LEAVING THE GROUP?
> If you are thinking of unsubcribing because you are getting too much mail,
> go the the web site and change your email delivery option instead. That
> will fix the problem, while maintaining your access to the group. If you
> insist on leaving us completely send a blank email to:
> disklavier-unsubscr ibe@yahooGroups. com
>
> Know someone who wants to join? Have them send a blank email to:
> disklavier-subscrib e@eGroups. com or give them this link:
> http://Yahoogroups. com/group/ disklavier/ join
> Yahoo! Groups Links
>
>
>
>
> Internal Virus Database is out of date.
> Checked by AVG - http://www.avg. com
> Version: 8.0.138 / Virus Database: 270.10.19/1938 - Release Date: 2/6/2009
> 5:28 PM
>
>
>