Disklavier

My suggestion is that you buy new powered speakers.  Usually, the better 
quality the sound, the uglier they are!  I own a MarkIIXG.  The output is 
dual monaural, so you don't really need a set of stereo speakers unless you 
want the same sound coming from two different places. Ensemble sounds are 
not audio, but MIDI instruments (data run through a synthesizer), and that 
is why you need powered speakers.

Carol Beigel

----- Original Message ----- 
From: "kenmortgages" <kenmortgages@...>
To: <disklavier@yahoogroups.com>
Sent: Saturday, January 09, 2010 6:52 PM
Subject: [disklavier] External Speakers for MX100IIXG


> Hi all
>
> After a lengthy absence (taking piano lessons) I'm back again and I hope 
> someone on the forum has some advice they can offer.
>
> I have an MX100IIXG which has just celebrated its 10th birthday and sounds 
> even better than when it arrived from the dealer (take a bow Greg - my 
> tuner). I've used Bose powered speakers (PC speakers) for the ensemble 
> parts for many years but they have recently failed.
>
> I thought I could send the ensemble signal to a pre-amp then into the main 
> stereo I have in the living room. Unfortunately the sound is very poor 
> quality - and somewhat distorted at higher volumes. I tried changing the 
> balance on the main menu, but that made little difference.
>
> Has anybody connected their XG module through a stereo system, or should I 
> just go out and buy another pair of powered speakers? The latter seems a 
> waste as the stereo (Bose) is quite an excellent unit.
>
> Cheers
> Ken
>
>
>
> ------------------------------------
>
> To Post a message to the group, send it to:   disklavier@...
>
> To Post a private message to Todd Muncy, the group's founder and 
> moderator, send it to:
> disklavier-owner@...
>
> To reach our group's web site go to:
> http://Yahoogroups.com/group/disklavier
>
> THINKING OF LEAVING THE GROUP?
> If you are thinking of unsubcribing because you are getting too much mail, 
> go the the web site and change your email delivery option instead.  That 
> will fix the problem, while maintaining your access to the group.  If you 
> insist on leaving us completely send a blank email to:
> disklavier-unsubscribe@...
>
> Know someone who wants to join?  Have them send a blank email to:
> disklavier-subscribe@... or give them this link:
> http://Yahoogroups.com/group/disklavier/join
> Yahoo! Groups Links
>
>
>
>
> No virus found in this incoming message.
> Checked by AVG - http://www.avg.com
> Version: 8.0.406 / Virus Database: 271.14.131/2608 - Release Date: 
> 1/8/2010 7:35 PM
>
>
>