Disklavier

Roberto,

A suggestion from Albania to suppress your piano signal in Acoustic mode on loudspeaker: please check the following. With the PRC  go to SETUP then AUDIO I/O  play with the arrow keys up/down to arrive to OMNI OUT . With arrow key left/right  put in front of OMNI OUT  :  "Output"  (and NOT Output + Piano TG).  Now it should be ok for your problem

Good luck !




________________________________
From: Roberto Fasciani <r.fasciani@...>
To: disklavier@yahoogroups.com
Sent: Thu, March 25, 2010 2:29:26 PM
Subject: Re: [disklavier] Bug in Version 4 for MARK IV ?

  
I own a C3 Mark IV Pro since more than two years, I haven't still upgraded to 4.0.
 
But ALWAYS my speakers play piano signal in Acoustic mode. I was disappointed about that but wrongly I assumed it was a normal behaviour.
 
Considering that Pro comes without built-in speakers I am now rethinking on cables connection from DKV my ampli system: 
I connected to Omni OUT instead of Speakers OUT.  
These connectors are different and (Large jacks instead of RCA) I never tried to connect Speakers OUT to my ampli system.
I tried to connect Speakers OUT directly to my speakers (passive speakers) and it didn't works.
 
So, maybe connecting Speakers OUT to an ampli system may solve both our problems.
 
Let me know your cable settings.... . 
Some suggestions before I go buying the cable to do this connection?
 
 
Roberto
 
----- Original Message ----- 
>From: Julien Roche 
>To: disklavier@yahoogro ups.com 
>Sent: Wednesday, March 24, 2010 10:17 AM
>Subject: [disklavier] Bug in Version 4 for MARK IV ?
>
>  
>
>
>Hi everybody,
>
>I just upgraded my Mark IV to version 4 for using my disklavier with iphone. It works perfectly after upgrading also the PRC.
>
>Unfortunately now in acoustic mode the piano signal is going ALSO to the loudspeakers. ...
>
>How to remedy to this problem ? This just happened when I have downloaded the Version 4 of MARK IV.
>
>Thank you for advice.
>
>Julien
>
>
>
>