Disklavier

try this

connect to the PRC-100 menu by tapping on the menu icon on the bottom left of 
the screen.  


tap on Piano Assign when in the PRC-100 menu 

follow instructions (there are about 4 or fives steps) and make sure that at the 
end of the process you see - 

stay close to your piano when assigning your remote to your disklavier.

For your remote to stay connected - you will need to see a "DKVxxxxxx" rather 
than "wireless LAN-temp" in what you call the  'Disklavier connect bubble'.

Hope that helps.



________________________________
From: goofyboy <orangele2003@...>
To: disklavier@yahoogroups.com
Sent: Sun, October 10, 2010 1:11:06 PM
Subject: [disklavier] Screwed up PRC100 connection to Disklavier

  
I was attempting to connect my Disklavier to my home network and managed to 
screw up my  Mark IV connection to my PRC-100, but it now says PRC-100 not 
connected with Disklavier.  When I hit the Disklavier connect bubble,
It shows "wireless LAN-temp" "initializing"  for about 40 secs and then goes 
back the the PRC-100 not connected with Disklavier screen. 


I was in the Network settings and so probably inadvertently altered settings 
there. 


Help appreciated,
Thanks