Disklavier

Joan,

A quick and effective means of controlling velocities on the disklavier 
is to adjust the velocities using Veloset in the dkv utils software 
package that is available within the files of the disklavier e-Groups 
site.  Via a pair of sliders Veloset allows for adjustment of velocities 
and is a quite effective means of setting the dynamic range within a 
piece of music.

Tom

P.S. If you are unable to locate or download the dkv utilities for any 
reason, send me a private e-mail and I'll send the zipped package to 
you.  The zipped file contains instructions for using these valuable 
utilities and is only 26 kB in size.

joannagalt@... wrote:

> Thank you for the extensive explanation. I will try your 
> suggestions this weekend.
> 
> Joan
> 
> --- In disklavier@y..., "Robert E. Welcyng" <rwelcyng@a...> wrote:
> 
>> The short story is . . . keep the note velocities within the range 
> 
> of 25 to 95.  
> 
>> To decide what velocity changes to make for any given file, it is 
> 
> helpful to
> 
>> first produce and study a histogram of the original note velocity 
> 
> distribution. 
> 
>> The histogram will enable you to determine whether the highest and 
> 
> lowest
> 
>> velocity values are outliers or part of the pattern.  
>> 
>> You may use a combination of note velocity alterations: scaling by 
> 
> a percentage,
> 
>> offsetting by adding or subtracting a constant value, or setting 
> 
> all values
> 
>> below 25 to 25 (or above 95 to 95).  It takes some judgment--there 
> 
> is no single
> 
>> right answer.  Your approach may depend upon whether you wish to 
> 
> preserve
> 
>> maximum dynamic range or you are trying to tame a file too loud for 
> 
> your piano
> 
>> room.
>> 
>> With the Mark II set to volume '0', all velocity values from 93 to 
> 
> 127 will play
> 
>> with the same loudness--that is, limiting occurs.  
>> 
>> At volume '-3', all velocity values from 96 to 127 will play with 
> 
> the same
> 
>> loudness and at the same level as they do within the limiting range 
> 
> of volume
> 
>> '0'.  
>> 
>> At volume '-6', the Mark II DKV will respond proportionally to all 
> 
> note
> 
>> velocities in the range of 25 to 127, but at less than the maximum 
> 
> sound output
> 
>> produced at volume '0' or '-3'.
>> 
>> The Mark II does strange things with note velocities below 25, 
> 
> depending on the
> 
>> DKV volume setting.  For consistent responses at all DKV volume 
> 
> settings, it's
> 
>> best to avoid note velocities below 25.
>> 
>> Joan Galt wrote:
>> 
>>> What is the ideal range to set the velocity of midi
>>> files for the disklavier?
>>> 
>> -- 
>> Robert Welcyng
>> Anchorage, Alaska
> 
> 
> 
> To Post a message to the group, send it to:   disklavier@...
> 
> To Post a private message to Todd Muncy, the group's founder and moderator, send it to:
> disklavier-owner@...
> 
> To reach our group's web site go to:
> http://Yahoogroups.com/group/disklavier
> 
> Todd's family web site was completely rewritten in June 2001 and contains some fun disklavier content and links to midi sites among other things, The url is:
> http://MuncyFamily.com
> 
> THINKING OF LEAVING THE GROUP?
> If you are thinking of unsubcribing because you are getting too much mail, go the the web site and change your email delivery option instead.  That will fix the problem, while maintaining your access to the group.  If you insist on leaving us completely send a blank email to:
> disklavier-unsubscribe@...
> 
> Know someone who wants to join?  Have them send a blank email to:
> disklavier-subscribe@... or give them this link:
> http://Yahoogroups.com/group/disklavier/join
>  
> 
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 
> 
> 
> 
> 
>