Disklavier

What is a PRC? How do I get one for my Disklaver?
Al Edrwards




________________________________
From: ipermedia <r.fasciani@...>
To: disklavier@yahoogroups.com
Sent: Mon, December 6, 2010 8:35:30 AM
Subject: [disklavier] Re: PRC-100 Failure

  
I solved the problem and the PRC resurrected!

I didn't noticed till now a small slide on the rear of the PRC, under the 
battery door. It's a sort of switch to connect the battery.
Moving it the PRC was able to boot.

Many thanks for all the suggestions (expecially the one from Mark Fontana to 
look for a "reset button", so I found the slide!).

PRC is still useful... even to command the metronome other than calibration and 
so on.

Roberto 

--- In disklavier@yahoogroups.com, "George F. Litterst" <PianoBench@...> wrote:
>
> Good morning, everyone.
> 
> Keep in mind that if you have connected your Mark IV to your local area 
>network, you can access all user features--EXCEPT the networking setup 
>features--by using the Virtual PRC on your computer. The Virtual PRC looks 
>exactly like your physical PRC. The differences are the you control it with your 
>mouse or track pad and when you need to type, you type from your computer 
>keyboard.
> 
> Your technician, however, will need the physical PRC in order to calibrate the 
>instrument. However, if he has one, he can connect his to your piano for that 
>purpose.
> 
> Regards,
> PianoBench
> 
> 
> On Dec 6, 2010, at 10:43 AM, ron8100 wrote:
> 
> > Sadly, a new PRC-100 costs $1000. I bought one last year.
> > 
> > --- In disklavier@yahoogroups.com, "ipermedia" <r.fasciani@> wrote:
> > >
> > > Good morning to everyone,
> > > 
> > > after 3 years of work my PRC-100 is dead. I was using it to command my DC3 
>Pro when the screen freezed and no key worked anymore.
> > > I tried to resume it disconnecting the battery and connecting again, but it 
>never starts again.
> > > 
> > > I'm trying to get assistance from Yamaha but I believe that after 3 years 
>there is no other way than to buy a new one.
> > > 
> > > I arrange myself with the Iphone applet, but it has not all the features 
>and the need for a Wi-Fi connection is a limit for my network, so I would 
>explore a way to make this PRC working.
> > > 
> > > Has anyone experienced this failure?
> > > Is there a way to repair this.... obsolete device?
> > > How much could cost a new one?
> > > 
> > > ... suggestions?
> > > 
> > > many thanks in advance,
> > > 
> > > Roberto
> > >
> > 
> >
>