Yahoo Groups archive

Disklavier

Index last updated: 2026-04-28 23:20 UTC

Message

Re: [disklavier] Re: Upgrading DC1M4 to System 4.0 from 1.2

2011-01-26 by athomik

Try getting the version 3.0 update disk from your dealer. Update the piano and the remote control to version 3.0 (don't forget the "Recall Demo Album" function after the PRC has been updated). When all this is working OK, then update to version 4.0.

athomik

On Jan 25 2011, Joan wrote:

>You might try calling your piano dealer to see if they have a hard copy of the update on CD. Since you don't have your disklavier connected to the internet that explains why you are unable to update via the network connection.
>
>
>--- In disklavier@yahoogroups.com, "Steven Greenberger" wrote:
>>
>> I just ran through the steps in upgrade manual and everything seemed to go perfectly. Now when I try to update the PRC-100, I get an error message after pressing on Interface Updater.
>>
>> It says the unit cannot connect to the I/O Center.
>>
>> Has anyone else had this issue. I've tried resetting the PRC and the Piano. It is connected to the DKV wireless and I can run the piano through the calibration steps.
>>
>> Is there a way to update the PRC without the I/O center? I was wondering if there is a way to do this with th SD card.
>>
>> Thanks for any help you can provide.
>>
>
>
>

Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.