CD-ROM Drive Replacement?
2016-08-03 by fctc4@juno.com
Where can I get a replacement for the CD-ROM drive for the DKC 55RCD? A plastic piece broke off prohibiting a CD from remaining in the drive and thus a CD
Thread
CD-ROM Drive Replacement?
Re: [disklavier] CD-ROM Drive Replacement?
2016-08-03 by Dmitry
Hi mate,
Had exactly the same issue with the CD in Mark IV. I just used the first one from my storage and it worked well without a problem. So it is just a normal CD drive.
All the best,
Dmitry
Show quoted textHide quoted text
On 3 August 2016 at 16:34, 'fctc4@...' fctc4@... [disklavier] <disklavier@yahoogroups.com> wrote:
Where can I get a replacement for the CD-ROM drive for the DKC 55RCD? A plastic piece broke off prohibiting a CD from remaining in the drive and thus a CD cannot be read. I forget what it was, but Yamaha wanted a ridiculous price for the drive (I think $400 as I recall from a while back).Is there anything special about the CD-ROM hardware or is all the magic done with the electronics and software? Could I kludge an external CD-ROM drive and then interface the output to the circuit board (provided I can make out the block diagrams and schematic from the service manual that I have)?I have consider the 850 as an entire replacement, but I am not interested at this time.TIA for any help and/or suggestions,Fred KagelNew Jersey
____________________________________________________________
What Happens When You Take a Testosterone Supplement
If you're like most guys, you love having energy, being able to have a ...
http://thirdpartyoffers.juno.com/TGL3132/57a190c67896610c616best01vuc
Re: [disklavier] CD-ROM Drive Replacement?
2016-08-03 by Dmitry
Oh, I might need to add it should have IDE interface (the old one) and not SATA (the modern one).
Show quoted textHide quoted text
On Wed, 3 Aug 2016, 4:37 PM Dmitry <dmitryos@...> wrote:
Hi mate,Had exactly the same issue with the CD in Mark IV. I just used the first one from my storage and it worked well without a problem. So it is just a normal CD drive.All the best,DmitryOn 3 August 2016 at 16:34, 'fctc4@juno.com' fctc4@juno.com [disklavier] <disklavier@yahoogroups.com> wrote:Where can I get a replacement for the CD-ROM drive for the DKC 55RCD? A plastic piece broke off prohibiting a CD from remaining in the drive and thus a CD cannot be read. I forget what it was, but Yamaha wanted a ridiculous price for the drive (I think $400 as I recall from a while back).Is there anything special about the CD-ROM hardware or is all the magic done with the electronics and software? Could I kludge an external CD-ROM drive and then interface the output to the circuit board (provided I can make out the block diagrams and schematic from the service manual that I have)?I have consider the 850 as an entire replacement, but I am not interested at this time.TIA for any help and/or suggestions,Fred KagelNew Jersey
____________________________________________________________
What Happens When You Take a Testosterone Supplement
If you're like most guys, you love having energy, being able to have a ...
http://thirdpartyoffers.juno.com/TGL3132/57a190c67896610c616best01vuc
Re: [disklavier] CD-ROM Drive Replacement?
2016-08-04 by fctc4@juno.com
Thanks, DmitryI will start to take the controller apart this coming weekend and look for a replacement.Fred ... From: Dmitry dmitryos@gmail.com [disklavier]
Re: [disklavier] CD-ROM Drive Replacement?
2016-08-06 by fctc4@juno.com
Oh, oh. replaced Mitsumi CD ROM Drive with another Mitsumi (untested) and am getting Error [005A:010B] upon boot-up. Meaning of error, anyone? Suggestions?
Re: [disklavier] CD-ROM Drive Replacement?
2016-08-07 by Dmitry
Hi Fred,
Just if you disconnect it completely - doesn't it show the same error or different? This might help to identify the faulty unit.
Thank you,
Dmitry
Show quoted textHide quoted text
On 6 August 2016 at 16:05, 'fctc4@juno.com' fctc4@... [disklavier] <disklavier@yahoogroups.com> wrote:
Oh, oh. replaced Mitsumi CD ROM Drive with another Mitsumi (untested) and am getting Error [005A:010B] upon boot-up.Meaning of error, anyone?Suggestions?Fred KagelFreehold Computer Training Ctr,
---------- Original Message ----------
From: "'fctc4@...' fctc4@... [disklavier]" <disklavier@...m>
To: disklavier@yahoogroups.com
Subject: Re: [disklavier] CD-ROM Drive Replacement?Date: Thu, 4 Aug 2016 03:28:03 GMT
Thanks, DmitryI will start to take the controller apart this coming weekend and look for a replacement.Fred
---------- Original Message ----------
From: "Dmitry dmitryos@... [disklavier]" <disklavier@yahoogroups.com>
To: disklavier@yahoogroups.com
Subject: Re: [disklavier] CD-ROM Drive Replacement?
Date: Wed, 03 Aug 2016 07:31:33 +0000
Oh, I might need to add it should have IDE interface (the old one) and not SATA (the modern one).
On Wed, 3 Aug 2016, 4:37 PM Dmitry <dmitryos@...> wrote:Hi mate,Had exactly the same issue with the CD in Mark IV. I just used the first one from my storage and it worked well without a problem. So it is just a normal CD drive.All the best,DmitryOn 3 August 2016 at 16:34, 'fctc4@...' fctc4@... [disklavier] <disklavier@yahoogroups.com> wrote:Â
Where can I get a replacement for the CD-ROM drive for the DKC 55RCD? A plastic piece broke off prohibiting a CD from remaining in the drive and thus a CD cannot be read. I forget what it was, but Yamaha wanted a ridiculous price for the drive (I think $400 as I recall from a while back).ÂIs there anything special about the CD-ROM hardware or is all the magic done with the electronics and software? Could I kludge an external CD-ROM drive and then interface the output to the circuit board (provided I can make out the block diagrams and schematic from the service manual that I have)?ÂI have consider the 850 as an entire replacement, but I am not interested at this time.ÂTIA for any help and/or suggestions,ÂFred KagelNew Jersey
____________________________________________________________
What Happens When You Take a Testosterone Supplement
If you're like most guys, you love having energy, being able to have a ...
http://thirdpartyoffers.juno.com/TGL3132/57a190c67896610c616best01vuc
____________________________________________________________
How to Read Your Kids' Deleted Text Messages
Today, as the array of online threats multiplies, parents are increasingly ...
http://thirdpartyoffers.juno.com/TGL3132/57a2b6b15c44a36b167d2st04vuc
____________________________________________________________
New Testosterone Booster Takes GNC by Storm
There’s a new supplement at GNC that’s got executives interested. Find ...
http://thirdpartyoffers.juno.com/TGL3132/57a57e7b5d5887e7b36e1st03vuc
Re: [disklavier] CD-ROM Drive Replacement?
2016-08-08 by Mark Fontana
You might check that the IDE master/slave jumper(s) are set correctly.
On 08/06/2016 01:05 AM, 'fctc4@...' fctc4@... [disklavier] wrote:
Show quoted textHide quoted text
\ufffdOh, oh. replaced Mitsumi CD ROM Drive with another Mitsumi (untested) and am getting Error [005A:010B] upon boot-up.\ufffdMeaning of error, anyone?\ufffdSuggestions?\ufffdFred KagelFreehold Computer Training Ctr,
Re: [disklavier] CD-ROM Drive Replacement?
2016-08-18 by fctc4@juno.com
When I first turn on the DKC, I get the following error with two different drive replacements AND with NO drive connected at all: CD Error[0003:080B] Seems